Toneable Conduit
About Us
cable, vdsl, patch

 

Toneable Duct- Pulling Lubricant- Outside Plant (OSP) HDPE Innerduct- Riser Rated Innerduct-Plenum Innerduct-Corrugated Duct- Outside Plant Conduit- Fiber Optic Duct- Raceway Systems

American Tele Data has in stock a complete Line of ETL verified products including Toneable Duct, OSP Duct, Raceway Products including Fiber Duct, Outside Plant Conduit, Plenum Innerduct, Riser Rated Innerduct, Corrugated Innerduct and more.

Call Today at (866) 372-342-3721 for the latest pricing

• Detectable Duct - Proven reliable method for locating buried duct.

• Extremely functional at a wide range of frequencies, compatible with industry standard locating equipment.

• No special tools are required to couple the duct and the PINPOINT® wire - current coupling methods can be utilized.

• Available as Smooth in/Smooth out and Smooth out/Ribbed in

• Available with sequential markings in feet or meters.
Ribbed
Corrugated
Figure 8
Aerial
Piggyback
Pinpoint
Cablecon
Plenum (Fire Jacket)
Microduct
Accessories

 

Download Toneable Conduit Report:Click Here

Toneable Conduit was Awarded Best New Transmission & Distribution Line Product

Tracer Wire Innerduct Smooth Wall Innerduct 1/2" to 6" Diameter

Tracer wire innerduct provide a method of locating underground fiber optic cable. The tracer wire is a single copper wire co-extruded into the innerduct providing a corrosion resistant conductor. An alternative method of locating buried fiber optic cable is to use detectable tape, available pre-installed in any of our duct products.

Patent Pending ConQuest Toneable Conduit Provides:

A fully embedded 18 gauge copper clad tone wire for precise locating An estimated 50% cost savings over less effective detection mechanisms

Easy rip-out design for coupling or adding lengths of conduit
Factory Assembled Cable-In-Conduit Provides: Enhanced cable protection-Saves installation time and cost-Makes upgrades faster and more efficient

Empty ConQuest Conduit for Future Cable Placements:

-Sometimes your conduit needs to be installed ahead of your cable, such as for developing neighborhoods and for some long fiber optic cable placements.

-ConQuest offers an entire package of products that provides a variety of sizes, wall thicknesses, colors and preinstalled pull lines.

CommScope's Cable-Pulling Lubricant, Whupp: Provides Microspheres that reduce surface contact between conduit and cable- Friction-reduction features, along with slow-drying and cling properties, enable better pulling through multiple conduit bends and long distances.

-Also limits the cost burden of pulling cable

-It is non-flammable and non-toxic. Toneable Conduit was Awarded Best New Transmission &

Distribution Line Product

Slit Duct-Endot Slit Duct-Slit Innerduct-Innerduct-Riser Rated Innerduct

High Density Polyethlene Duct-OSP-Outside Plant Innerduct- OSP Duct-Plenum- Corrugated Innerduct Corrugated HDPE- Riser Rated Innerduct-Corrugated Duct- Outside Plant Conduit- Fiber Optic Duct- Pre- Installed Fiber In Duct

American Tele Data specializes in fast turnaraound for a Complete Line of Innerduct and Raceway Products including Fiber Duct, Outside Plant Duct, Plenum Innerduct, Riser Rated Innerduct, Corrugated Innerduct and more. Our corrugated HDPE is manufactured from High Density Polyethylene (HDPE) and is intended to be placed inside of existing duct. It's ideal for pulls under 1000 ft. and is designed to reduce surface contact when pulling cable. This lightweight product offers maximum flexibility, and allows for installation in small or restricted areas. Our Corrugated innerduct is available in 1" and 1 1/4". The standard color is orange and is offered in a variety of other colors. Sequential marked footage is standard. Custom options, such as multiple colors per reel and Slit Duct, are also available.

American Tele Datacan ship many HDPE innerduct and HDPE duct products the same day, however on special orders and colors please be advised that we require 7-10 days to process your innerduct order. Thank you.

1/2" TO 6" Innerduct Diameter Sizes

Colors and Identification

  • Standard colors available in: white, black, blue, green, red, orange, lilac, grey, yellow, brown, buff, terra cotta.
  • Striping: Striping combinations are available in all colors in combinations of single, double, triple and quad stripes.

Other Identification

  • Innerduct size, SDR and sequential footage markings every 2’ are laser imprinted on every order.
  • Custom imprints such as company name, project name or any other special identification markings also available

Options

  • Lubrication
  • Up to four lengths/colors of innerduct per reel available laid in parallel or segmented on a reel.
  • Pre-installed pull tape, tracer tape
Smooth Wall Innerduct 1/2" to 6" Diameter

Smooth wall is the standard High Density Polyethylene (HDPE) Duct. The interior of smooth wall has a glass-like finish which delivers the lowest coefficient of friction of all available non-lubricated innerducts. Blue Diamond smooth wall innerduct is a durable high quality product for direct burial applications.

Ribbed Wall Innerduct Smooth Wall Innerduct 1/2" to 6" Diameter

Blue Diamond’s ribbed wall innerduct is designed to allow extremely long cable pulls to glide through the interior raised ribs. All ribbed wall innerduct is internally ribbed and available in any SDR and SIDR rating.

Tracer Wire Innerduct Smooth Wall Innerduct 1/2" to 6" Diameter

Tracer wire innerduct provide a method of locating underground fiber optic cable. The tracer wire is a single copper wire co-extruded into the innerduct providing a corrosion resistant conductor. An alternative method of locating buried fiber optic cable is to use detectable tape, available pre-installed in any of our duct products.

Figure 8 Duct Smooth Wall Innerduct 1/2" to 6" Diameter

Blue Diamond’s figure 8 innerduct features a high tensile galvanized support strand for aerial placement of duct. The support strand is an integral component of the co-extruded duct.

How to build a part number
 

Prefix

Size

Wall Thickness

Color

Stripes

Ribbed interior

Tape

BDI

06 = ½”

2 = SDR 9

OR = Orange

ORS =Orange Stripe

RI

T10 = 1000# tape

 

09 = ¾’

3 = SDR 11

BL = Blue

BLS = Blue Stripe

 

T12.5 = 1250# tape

 

11 = 1”

4 = SDR 13.5

BK = Black

BKS = Black Stripe

 

T18 = 1800 # tape

 

13 = 1 ¼”

5 = SCH 40

GR = Green

GRS = Green Stripe

 

T25 = 2500# tape

 

16 = 1 ½”

6 = SDR 15.5

RD = Red

RDS = Red Stripe

 

MT = 1250# detectable tape

 

21 = 2”

7 = SCH 80

YL = Yellow

YLS = Yellow Stripe

   
 

31 = 3”

8 = SDR 17

WH = White

WHS = White Stripe

   
 

41 = 4”

 

GY = Gray

GYS = Gray Stripe

   
 

51 = 5”

 

BR = Brown

BRS = Brown Stripe

   
 

61 = 6”

 

BF = Buff

BF = Buff Stripe

   
     

TC = Terra Cotta

TCS = Terra Cotta Stripe

   
     

LI = Lilac

LIS = Lilac Stripe

Duct Plugs

Blue Diamond duct plugs seal your conduit or innerduct from water, animals, debris or any other underground intrusion. Available in various sizes and models, duct plugs are designed for easy retrofitting and removal. Duct plugs help protect and seal occupied and unoccupied conduit and innerduct in an extensive range of applications.

ROCKAWAY, NJ - We also specialize in last minute rapid turnaround and delivery. our new corrugated slit duct is made of low-density polyethylene plastic for greater flexibility when joining and racking innerducts. Easy to use, it slides readily over fiber optic cable and inside innerduct. The slit duct is offered in 250-foot lengths that can be cut for application in the field. It is available in high-visibility orange in sizes from 1/2" ID through 2" ID.innerduct, corrugated inneduct, and plenum innerduct that is also ETL verified Innerduct, plenum innerduct, fiber optic duct, conduit and raceway systems including Fiber Duct, Outside Plant Conduit, Plenum Innerduct, Riser Rated Innerduct, Toneable Duct, Corrugated Innerduct and more. Corrugated HDPE Premier Corrugated HDPE is manufactured from High Density Polyethylene (HDPE) and is intended to be placed inside of existing innerduct.

West Coast (866) FIBER-21 -------------------------(866) 342-3721------------------EEast Coast-(866) 650-3282



See below for our prices on 5000 ft Rolls of corrugated innerduct. If you require less than 5000 feet, please call our offices at our toll free number


Part No Description Feet Price
P-100T-5000 1" 1” Plenum Innerduct w/tape 5000 $7650.00
P-125T-5000 1 ¼” Plenum Innerductw/tape 5000 $8700.00
PEC-100T-5000 1” HDPE Innerduct w/tape 5000 $1395.00
PEC-125T-5000 1 ¼” HDPE Innerduct w/tape 5000 $1495.00
Volume discounts always apply. Please call our sales offices to obtain custom quotes

Corrugated HDPE Premier Corrugated HDPE is manufactured from High Density Polyethylene (HDPE) and is intended to be placed inside of existing innerduct. It¹s ideal for pulls under 1000 ft. and is designed to reduce surface contact when pulling cable. This lightweight product offers maximum flexibility, and allows for installation in small or restricted areas. Corrugated duct is available in 1" and 11/4". The standard color is orange and is offered in a variety of other colors. Sequential marked footage is standard. Custom options, such as multiple colors per reel and Slit Duct, are also available.

SIZE Color Part Number Nominal ID (Inside) Nominal OD (Outside) Pull Tape Reel Size Reel Length (Feet)
1 inch Orange PEC-100T-1000 1.049" 1.365" 900 lb 48-30-24 1000 Feet
1 inch Orange PEC-100T-1800 1.049" 1.365" 900 lb 48-30-24 1800 Feet
1 inch Orange PEC-100T-2500 1.049" 1.365" 900 lb 66-41-24 2500 Feet
1 inch Orange PEC-100T-5000 1.049" 1.365" 900 lb 72-41-24 5000 Feet
1 inch Orange PEC-100T-6500 1.049" 1.365" 900 lb 72-45-24 6500 Feet
1 inch Orange PEC-100T-8000 1.049" 1.365" 900 lb 82-41-24 8000 Feet
1 1/4" Orange PEC-125T-1000 1.250" 1.550" 900 lb 48-30-24 1000 Feet
1 1/4" Orange PEC-125T-2500 1.250" 1.550" 900 lb 66-41-24 2500 Feet
1 1/4" Orange PEC-125T-4000 1.250" 1.550" 900 lb 72-41-24 4000 Feet
1 1/4" Orange PEC-125T-5000 1.250" 1.550" 900 lb 72-41-24 5000 Feet
1 1/4" Orange PEC-125T-6000 1.250" 1.550" 900 lb 82-41-24 6000 Feet
1 1/4" Orange PEC-125T-6500 1.250" 1.550" 900 lb 82-41-24 6500 Feet

 

** Core rebates are available for reels broken down and returned to the manufacturer. Call our offices for details

Prices reflect COD and do not include shipping or processing fees. Please add a 3% minimum charge for all credit card orders.

Part Number Description Packaging List Price- Please Call For Discounts
ICS 050 41 01 02-250 1/2 " Corrugated Split Duct 250 Foot Coil $ .45 Foot
ICS 075 41 01 02-250 3/4" Corrugated Split Duct 250 Foot Coil $ .55 Foot
ICS 100 41 01 02-250 1" Corrugated Split Duct 250 Foot Coil $ .68 Foot
ICS 125 41 01 02-250 1 1/4" Corrugated Split Duct 250 Foot Coil $ .85 Foot
ICS 150 41 01 02-250 1" Corrugated Split Duct 250 Foot Coil $.95 Foor
ICS 150 41 01 02-250 1" Corrugated Split Duct 250 Foot Coil $ 1.15 Foot

UL Listed-We Now Offer Pre- Installed Fiber Cable In Our Innerduct- Ask Us For Details- (866) 342-3721

 

OurPlenum Innerduct Meets UL 910 & UL 2024- New 85% Fill Ratio Cable Guide!

American Tele Data also carries a complete line of plenum innerduct and plenum raceway products including Plenum Fiber Duct, Outside Plant Conduit, Plenum Innerduct, Riser Rated Innerduct, Corrugated Innerduct and more. Plenum Duct is a flexible, non-metallic, corrugated raceway used for effective cable and fiber optic management within interior raceways. Premier-Plenum meets UL-(910) standards for the National Electrical Code, Article 770, and satisfies UL-2024 standards for low smoke and flame propagation. Pur Plenum duct is offered in 1" and 1 1/4", with pre-installed pull tape for easy cable installation. The standard color is orange and is offered in a variety of other colors. Sequential marked footage is standard. Custom options, such as multiple colors per reel and Slit Duct, are also available..

Corrugated Plenum Specifications- Reel Sizes Below

Plenum innerduct is offered in 1"and 11/4", with pre-installed pull tape for easy cable installation. The standard color is orange and is offered in a variety of other colors. Sequential marked footage is standard. Custom options, such as multiple colors per reel and Slit Duct, are also available.

American Tele Data provides turnaraound for corrugated innerduct by providing rapid shipping service that we have in stock including a complete Line of ETL verified Innerduct, plenum innerduct, fiber optic duct, conduit and raceway systems including Fiber Duct, Outside Plant Conduit, Plenum Innerduct, Riser Rated Innerduct, Toneable Duct, Corrugated Innerduct and more. Corrugated HDPE Premier Corrugated HDPE is manufactured from High Density Polyethylene (HDPE) and is intended to be placed inside of existing innerduct. Plenum innerduct is ideal for pulls under 1000 ft. and is designed to reduce surface contact when pulling cable. Our plenum innerduct is a flexible, non-metallic, corrugated raceway used for effective cable and fiber optic management within interior raceways. Our Plenum duct is offered in 1" and 1 1/4", with pre-installed pull tape for easy cable installation. The standard color is orange and is offered in a variety of other colors. Sequential marked footage is standard. Custom options, such as multiple colors per reel and Slit Duct, are also available.This lightweight product offers maximum flexibility, and allows for installation in small or restricted areas. Corrugated duct is available in 1" and 11/4". The standard color is orange and is offered in a variety of other colors. Sequential marked footage is standard. Custom options, such as multiple colors per reel and Slit Duct, are also available.