Product Categories

About Us

 

Cable Manager - Cable Tray Distributor - CM25 - PRO-10 Wire Cable Tray System Junctions and Intersections - Cabletray Supplier-Cable Trays- Cable Tray Systems- Basket Tray- Raceway Systems

American Tele Data Is Your One Source For All Your Cable Tray-Cable Trays- Cable Tray Systems- Basket Tray- Raceway Systems

Live Support by Citricle

PRO-10 Wire Cable Tray System M.E.2 Wire Cable Tray System

PRO-10 Wire Cable Tray System
Junctions

CM25 Cable Tray Junctions/Intersections

Pre-fabricated junctions (Ø.187") have a grid pattern of 2 inches x 4 inches and are available in standard widths of 6, 8, 12, 18 and 24 inches with a depth/height of 2, 4 or 6 inches. Junctions/intersections lengths are standard: 12 inches wide or less come 2 feet in length and junctions/intersections more than 12 inches wide come 3 feet in length. All drops are available in 12, 18 or 24 inches in length. See finish chart for colors; safety yellow is the standard. Custom colors are available. Junctions/intersections include interconnecting hardware. CM20 meets UL requirements as a ground conductor.

CM35 Cable Tray Junctions/Intersections

Pre-fabricated junctions (Ø.250") have a grid pattern of 3 inches x 6 inches and are available in standard widths of 8, 12, and 18 with a depth/height of 2 or 4. Junctions/intersections lengths are standard: 12 inches wide or less come 2 feet in length and junctions/intersections more than 12 inches wide come 3 feet in length. All drops are available in 12, 18 or 24 inches in length. See finish chart for colors; safety yellow is the standard. Custom colors are available. Junctions/intersections include interconnecting hardware. CM30 meets UL requirements as a ground conductor.

4-Way
L
T
Drop

 

  • Requires NO bending or cutting; ready–made 4-way, “T” and “L” shaped junctions
  • All sizes conforms to the National Electric Code, UL Classified
  • Acts as a continuous ground conductor; with built in splices
  • Adapts to difficult architectural designs to accommodate changes in direction and elevation of cable runs
  • Cuts installation time up to 50 percent
  • Provides strength, rigidity without additional hardware; has smooth edges
  • Manufactured in an array of protective, powder-coated, colored finishes to minimize corrosion
  • Alternative finishes:
    • Hot dip galvanized
    • 304 stainless steel
    • 316L stainless steel
  • Powder coating is standard finish
  • 2"x2" up to 6"x36" Custom sizes available

Innovative Design

PRO-10's innovative design is based on pre-fabricated junctions/intersections and the ability to provide powder coated finishes while maintaining ground. The design eliminates the need to cut or bend sections or install a separate ground wire. PRO-10 is UL classified as to its suitability as an equipment grounding conductor only.

No connecting hardware required. All support hardware available to match finish. Powder coating is standard finish.
Custom sizes available.

Installation

PRO-10's wire cable tray systems require only one tool and very few accessory items for installation. Pre-fabricated junctions/intersections reduce man-hours by eliminating cutting and fabrication in the field. With center hung trapeze, wall or floor mount accessories, PRO-10 is prepared to handle the toughest installations.

Customer Service

PRO-10's wire cable trays and accessories are available for quick delivery from stock. PRO-10 is made in the U.S.A., shortening lead and delivery time. For special applications, our customer service employees are eager to help in design and product availability.

Click on a section to learn more

Cable Tray Straight Sections

Straight sections have a grid pattern of 2 inches x 2 inches or 2 inches x 4 inches and are available in standard widths from 2 inches up to 36 inches. Lengths can be ordered in 1, 2, 5, 8 and 10 feet with a depth/height of either 2, 4 or 6 inches. See finish chart for standard colors; Chrome is the standard. Custom sizes and colors are available.

Sections include interconnecting hardware.

 

Cable Tray Junctions / Intersections

Pre-fabricated junctions have a grid pattern of 2 inches x 2 inches or 2 inches x 4 inches and are available in standard widths from 2 inches up to 24 inches with a depth/height of 2, 4 or 6 inches. Junctions/intersections lengths are standard: 12 inches wide or less come 2 feet in length and junctions/intersections more than 12 inches wide come 3 feet in length. All drops are available in 12, 18 or 24 inches in length.

See finish chart for colors; chrome is the standard. Custom colors are available.

Junctions/intersections include interconnecting hardware.

 

Cable Tray Reducers

Pre-fabricated reducers are available in standard configurations with a grid pattern of 2 inches x 2 inches or 2 inches x 4 inches or and a depth/height of 2, 4 or 6 inches. All reducers are 2 feet in length.

See finish chart for standard colors; safety yellow being the standard. Custom colors are available.

Sections include interconnecting hardware.

 

Cable Tray Accessories & Hardware Kits

Accessories and hardware kits that provide support and cleanly finish the installation. With an assortment of threaded rod kits and various extensions, there is support for floor, wall or ceiling mounted cable tray options to conveniently complete the job.

See finish chart for standard colors; chrome being the standard.

Custom colors are available.

 

Wire Management Products

The Wiremaid U.S.A. Products Division of Vutec Corporation entered the cable tray arena with the development of PRO-10 and M.E.2 wire cable tray systems.
PRO-10 cable tray
is an innovative and cost-effective system that easily adapts to the most difficult installations. Designed for the low voltage industry and developed with the architect, engineer and installer in mind, PRO-10's pre-fabricated junctions/intersections and ease of installation make it a cost-effective choice of contractors throughout the United States.

M.E.2 cable tray management system is manufactured with rigid .187 diameter zinc-plated steel wire, welded in a two inch by four inch grid facilitating easy cable break outs while supporting the cable. The open grid design prevents dirt build-up and dust experienced in closed cable trays.

?
PRO-10 Wire Cable Tray

Wiremaid U.S.A. has just created the "Cable Tray Maker,” an easy-to-use cable tray designer that takes the guess work out of ordering a cable tray system. Click on a cable tray part, choose your options and add the quantity. It creates a bill of materials that you can print or email.

• Requires NO bending or cutting; ready–made 4-way, “T” and “L” shaped junctions

• Acts as a continuous ground conductor; no grounding splices

• Adapts to difficult architectural designs to accommodate changes in direction and elevation of cable runs

• Cuts installation time up to 50 percent

• Provides strength, rigidity without additional hardware; has smooth edges

• Manufactured in an array of protective, powder-coated, colored finishes to minimize corrosion

• Featured in light or heavy duty product styles

• All support hardware available

• Powder coating is standard finish

• Custom sizes available

PRO-10 Cable Tray System

?
M.E.2 Wire Cable Tray

M.E.2 Cable Tray CAD drawings

• Factory fabricated junctions save installation time and cut costs.

• Seven or 10 foot length straight tray sections can be cut to length or formed by cutting side wires to change routing elevation at the installation site.

• Two x 4 inch grid provides easy cable routing in or out of tray sections.

• Available metal tray divider for cable separation.

• Rigid steel construction – Made in the USA.

M.E.2 Cable Tray System

?
 
cisco systems
Telco Systems
Anritsu
Leviton
 
 
 
 
 
 
telecom supply
 
 
 

 

 

 

 

 

 

 

 

 

BIF-Bend Insensitive Fiber

New Bend Insensitive Fiber Jumpers