|
Plenum Duct-Innerduct-Plenum Innerduct- Corrugated Innerduct- Corrugated Raceway- Plenum
American Tele Data
Guarantees "the Best Pricing On All Innerduct"
 American Tele Data
is an active CCR registered supplier for the United
States Government
 Plenum Innerduct
American Tele Data carries a complete line of plenum innerduct and plenum raceway products including Plenum Fiber Duct, Outside Plant Conduit, Plenum Innerduct, Riser Rated Innerduct, Corrugated Innerduct and more. Plenum Duct is a flexible, non-metallic, corrugated raceway used for effective cable and fiber optic management within interior raceways. Premier-Plenum meets UL-(910) standards for the National Electrical Code, Article 770, and satisfies UL-2024 standards for low smoke and flame propagation. Our Plenum duct is offered in 1" and 1 1/4", with pre-installed pull tape for easy cable installation. The standard color is orange and is offered in a variety of other colors. Sequential marked footage is standard.
.jpg) Custom options, such as multiple colors per reel and Slit Duct, are also available. We have three manufactures including Premier Corrugated HDPE which is manufactured from High Density Polyethylene (HDPE) and is intended to be placed inside of existing innerduct. Corrugated plenum innerduct is ideal for pulls under 1000 ft. and is designed to reduce surface contact when pulling cable. This lightweight product offers maximum flexibility, and allows for installation in small or restricted areas. Corrugated duct is available in 1", 11/4" and 11/2". The standard color is orange and is offered in a variety of other colors. Sequential marked footage is standard. Custom options, such as multiple colors per reel and Slit Duct, are also available.
American Tele Data an innerduct and duct supplier specializes in fast turnaraound for a Complete Line of Innerduct and Raceway Products including Innerduct, High Density Polyethlene Duct, Outside Plant Innerduct, HDPE, Most OSP Duct ,Plenum Innerduct,Corrugated Innerduct, Corrugated HDPE, Riser Rated Innerduct, Outside Plant Conduit, Fiber Optic duct and our custom Pre-Installed Fiber In Duct. ATD's HDPE innerduct is available in sizes ranging from 1/2" to 6" inches in diameter with several SDR or HDPE innerduct wall thickeness. American Tele Data stocks many sizes of innerduct and can ship most innerduct orders including custom- including colored innerduct within 48 hours. Our corrugated HDPE is manufactured from High Density Polyethylene (HDPE) and is intended to be placed inside of existing duct. Our corrugated innerduct is ideal for pulls under 1000 ft. and is designed to reduce surface contact when pulling cable. This lightweight product offers maximum flexibility, and allows for installation in small or restricted areas. Our Corrugated innerduct is available in 1" and 1 1/4". The standard color is orange and is offered in a variety of other colors. Sequential marked footage is standard. Custom options, such as multiple colors per reel and Slit Duct, are also available.
American Tele Data will provide all your innerduct needs from one 250 coil to a several truckloads of 6" HDPE. Call us today for a competitive price and let us take care of all the logistics of delivering our product to your door.
American Tele Data
Guarantees "the Best Pricing On All Innerduct."
American Tele Data
is an active CCR registered supplier for the United
States Government
We
Can Ship the Same Day!  Many
Colors Available!
 SEE
BELOW ORDERING INFO for 1" & 1.25" Plenum Innerduct- Is In "RED"
[prices do not include shipping,
FOB point PA]
OurPlenum
Innerduct Meets UL 910 & UL 2024-
New 85% Fill Ratio Maxcell!
Plenum
Available at 1-
1/2"
and HDPE Innerduct Available in 1/2"
to 6" Sizes
Pricing
for 1" & 1.25" Plenum Innerduct- Is In "RED" [prices
do not include shipping, FOB point PA]
Premier Plenum Duct is a flexible, non-metallic, corrugated raceway used for effective cable and fiber optic management within interior raceways. Premier Plenum meets UL-(910) standards for the National Electrical Code, Article 770, and satisfies UL-2024 standards for low smoke and flame propagation.
Premier Plenum is offered in 1", 11/4" and 11/2, with pre-installed pull tape for easy cable installation. The standard color is orange and is offered in a variety of other colors. Sequential marked footage is standard. Custom options, such as multiple colors per reel and Slit Duct, are also available.
Future growth or maintenance of your interior cable system is made easy with Premier Plenum.
Plenum Reels Ordering Information
| Size |
Color |
Part No. |
Nominal
i.d. |
Nominal
O.D. |
Pull Tape |
Reel Size |
Reel
Length (ft.) |
Pricing- Call- We cannot Offer ONLINE Pricing Due To Daily Prices in Oil and Resin Prices |
| 1" |
Orange |
P-100T-500 |
1.049" |
1.35" |
900 lb |
36-36-21 |
500 |
|
| 1" |
Orange |
P-100T-1000 |
1.049" |
1.35" |
900 lb |
36-36-21 |
1000 |
|
| 1" |
Orange |
P-100T-2000 |
1.049" |
1.35" |
900 lb |
44-36-21 |
2000 |
|
| 1" |
Orange |
P-100T-2800 |
1.049" |
1.35" |
900 lb |
48-41-24 |
2800 |
|
| 1" |
Orange |
P-100T-5000 |
1.049" |
1.35" |
900 lb |
66-41-24 |
5000 |
|
| 1" |
Orange |
P-100T-6000 |
1.049" |
1.35" |
900 lb |
72-41-24 |
6000 |
|
| 1" |
Orange |
P-100T-9000 |
1.049" |
1.35" |
900 lb |
82-41-24 |
9000 |
|
| 11/4" |
Orange |
P-125T-700 |
1.25" |
1.56" |
900 lb |
36-36-21 |
700 |
|
| 11/4" |
Orange |
P-125T-1500 |
1.25" |
1.56" |
900 lb |
44-36-21 |
1500 |
|
| 11/4" |
Orange |
P-125T-1800 |
1.25" |
1.56" |
900 lb |
48-41-24 |
1800 |
|
| 11/4" |
Orange |
P-125T-3400 |
1.25" |
1.56" |
900 lb |
66-41-24 |
3400 |
|
| 11/4" |
Orange |
P-125T-4000 |
1.25" |
1.56" |
900 lb |
72-41-24 |
4000 |
|
| 11/4" |
Orange |
P-125T-6000 |
1.25" |
1.56" |
900 lb |
82-41-24 |
6000 |
|
| 11/2" |
Orange |
P-150T-500 |
1.57" |
1.80" |
900 lb |
36-36-21 |
500 |
|
| 11/2" |
Orange |
P-150T-700 |
1.57" |
1.80" |
900 lb |
44-36-21 |
700 |
|
| 11/2" |
Orange |
P-150T-1000 |
1.57" |
1.80" |
900 lb |
48-41-24 |
1000 |
|
| 11/2" |
Orange |
P-150T-2500 |
1.57" |
1.80" |
900 lb |
66-41-24 |
2500 |
|
| 11/2" |
Orange |
P-150T-3500 |
1.57" |
1.80" |
900 lb |
72-41-24 |
3500 |
|
| 11/2" |
Orange |
P-150T-5000 |
1.57" |
1.80" |
900 lb |
82-41-24 |
5000 |
|
Plenum Coils
| Size |
Color |
Part No. |
Nominal
i.d. |
Nominal
O.D. |
Pull Tape |
Coil
Length (ft.) |
| 1" |
Orange |
P-100T-500 |
1.049" |
1.35" |
900 lb. |
Up to 500 |
| 1 1/4" |
Orange |
P-125T-500 |
1.25" |
1.56" |
900 lb. |
Up to 500 |
| 1 1/2" |
Orange |
P-150T-350 |
1.57" |
1.80" |
900 lb. |
Up to 350 |
Test Results (Using Test Method UL-2024)
| Properties |
Value |
| Smoke peak optical |
0.02 |
| Smoke average optical density |
0.01 |
| Max. flame spread distance (ft.) |
1.5' |
| Max. flame temperature |
554° |
Sample Part Number
| P |
100 |
T |
S |
2500 |
| Plenum |
1" (I.D.) |
Polyester Tape |
*Slit Duct
(optional) |
Put-Up |
* Pull tape not available w/ Slit Duct |
Split Corrugated
 Features & Benefits
- No special tools required, simply twist locks together
- Pre-slit design for easy installation over existing cables
- Flexible corrugated design, readily adapts to cable orientation
- Lightweight coils for easy deployment
- Bright orange color for quick identification
- Available in several diameters from 3/4" to 2" for protecting single or multiple cables
GENERAL INFORMATION
Our Slit is a corrugated slit conduit for use where additional protection and identification is required, such as in underground handholes. Available in bright orange color for rapid identification or aerial (UV formulated) black for use in areas where exposure to sunlight will occur. Fiber-Guard Slit is manufactured in five diameters from 3/4" to 2" in standard 250-ft.coils. Special lengths can be made available upon request but minimum quantities may apply.
| Description |
Shipping Weight |
| Fiber-Guard Slit Orange 3/4", 250' coil |
11.8 lbs |
| Fiber-Guard Slit Black 3/4", 250' coil |
11.8 lbs |
| Fiber-Guard Slit Orange 1", 250' coil |
16.5 lbs |
| Fiber-Guard Slit Black 1", 250' coil |
16.5 lbs |
| Fiber-Guard Slit Orange 1-1/4", 250' coil |
22.9 lbs. |
| Fiber-Guard Slit Black 1-1/4", 250' coil |
22.9 lbs. |
| Fiber-Guard Slit Orange 1-1/2", 250' coil |
26.3 lbs. |
| Fiber-Guard Slit Black 1-1/2", 250' coil |
26.3 lbs. |
| Fiber-Guard Slit Orange 2", 250' coil |
28.3 lbs. |
| Fiber-Guard Slit Black 2", 250' coil |
28.3 lbs. |
| Trade Size |
Average Outside Diameter OD(inches) |
Average Inside Diameter ID (inches) |
Weight per Foot (pounds) |
| 3/4" |
0.930 |
0.750 |
0.037 |
| 1" |
1.315 |
1.020 |
0.057 |
| 1-1/4" |
1.630 |
1.330 |
0.082 |
| 1-1/2" |
1.875 |
1.540 |
0.096 |
| 2" |
2.300 |
2.010 |
0.104 |
|
• Flexible and can be worked easily in tight areas.
• Ribbed duct is available with SILICORE® Super Slick Permanent Lining.
• Available with sequential markings in feet or meters. • Can withstand typical pulling loads and is highly resistant to crushing forces.
• High Density Polyethylene (HDPE) resists oils, gasoline and other compounds.• Outside ribbed is ideal when installing multiple sub-ducts into a larger main duct.
|
 |
|
Plenum innerduct is offered in 1"and 11/4", with pre-installed pull tape for easy cable installation. The standard color is orange and is offered in a variety of other colors. Sequential marked footage is standard. Custom options, such as multiple colors per reel and Slit Duct, are also available.
 We Carry A Complete Array of Innerduct Couplers
Future growth or maintenance of your interior cable system is made easy with innerduct or raceway systems below-
  Raceway Systems -
  UL Listed 
We
can deliver a 500 Foot Reel of Innderduct (NOT PLENUM) to Most Locations
In the United States For As Little As $150.00 Per 500 Foot Coil
American Tele Data
- Specializes In Rapid
Turnaround
"Last
Minute Change Orders" ?- Can't get your product from
your local distributor?- Your Contractor Installed the wrong
duct and you need something right away?- "Forgot about
the duct and fiber needs instaled over the weekend?"
- "Maybe need something shipped in 48 hours?- We specialize
in last minute turnarounds- Premier prides itself as a rapid-
turn around specialist as we want to earn your business!
Call us for your large projects as well- GOVERNMENT-MILITARY
WELCOME!
CALL
TODAY (866) 650-DATA or
(866) 342-3721
|
|
|
Colors and Identification
- Standard colors available in: white, black, blue, green, red, orange, lilac, grey, yellow, brown, buff, terra cotta.
- Striping: Striping combinations are available in all colors in combinations of single, double, triple and quad stripes.
Other Identification
- Innerduct size, SDR and sequential footage markings every 2’ are laser imprinted on every order.
- Custom imprints such as company name, project name or any other special identification markings also available
Options
- Lubrication
- Up to four lengths/colors of innerduct per reel available laid in parallel or segmented on a reel.
- Pre-installed pull tape, tracer tape
 |
Smooth Wall Innerduct 1/2" to 6" Diameter
Smooth wall is the standard High Density Polyethylene (HDPE) Duct. The interior of smooth wall has a glass-like finish which delivers the lowest coefficient of friction of all available non-lubricated innerducts. Blue Diamond smooth wall innerduct is a durable high quality product for direct burial applications. |
 |
Ribbed Wall Innerduct Smooth Wall Innerduct 1/2" to 6" Diameter
Blue Diamond’s ribbed wall innerduct is designed to allow extremely long cable pulls to glide through the interior raised ribs. All ribbed wall innerduct is internally ribbed and available in any SDR and SIDR rating. |
 |
Tracer Wire Innerduct Smooth Wall Innerduct 1/2" to 6" Diameter
Tracer wire innerduct provide a method of locating underground fiber optic cable. The tracer wire is a single copper wire co-extruded into the innerduct providing a corrosion resistant conductor. An alternative method of locating buried fiber optic cable is to use detectable tape, available pre-installed in any of our duct products. |
 |
Figure 8 Duct Smooth Wall Innerduct 1/2" to 6" Diameter
Blue Diamond’s figure 8 innerduct features a high tensile galvanized support strand for aerial placement of duct. The support strand is an integral component of the co-extruded duct. |
How to build a part number
Prefix |
Size |
Wall Thickness |
Color |
Stripes |
Ribbed interior |
Tape |
BDI |
06 = ½” |
2 = SDR 9 |
OR = Orange |
ORS =Orange Stripe |
RI |
T10 = 1000# tape |
| |
09 = ¾’ |
3 = SDR 11 |
BL = Blue |
BLS = Blue Stripe |
|
T12.5 = 1250# tape |
| |
11 = 1” |
4 = SDR 13.5 |
BK = Black |
BKS = Black Stripe |
|
T18 = 1800 # tape |
| |
13 = 1 ¼” |
5 = SCH 40 |
GR = Green |
GRS = Green Stripe |
|
T25 = 2500# tape |
| |
16 = 1 ½” |
6 = SDR 15.5 |
RD = Red |
RDS = Red Stripe |
|
MT = 1250# detectable tape |
| |
21 = 2” |
7 = SCH 80 |
YL = Yellow |
YLS = Yellow Stripe |
|
|
| |
31 = 3” |
8 = SDR 17 |
WH = White |
WHS = White Stripe |
|
|
| |
41 = 4” |
|
GY = Gray |
GYS = Gray Stripe |
|
|
| |
51 = 5” |
|
BR = Brown |
BRS = Brown Stripe |
|
|
| |
61 = 6” |
|
BF = Buff |
BF = Buff Stripe |
|
|
| |
|
|
TC = Terra Cotta |
TCS = Terra Cotta Stripe |
|
|
| |
|
|
LI = Lilac |
LIS = Lilac Stripe |
 Duct Plugs
Blue Diamond duct plugs seal your conduit or innerduct from water, animals, debris or any other underground intrusion. Available in various sizes and models, duct plugs are designed for easy retrofitting and removal. Duct plugs help protect and seal occupied and unoccupied conduit and innerduct in an extensive range of applications.
 Custom Colors Are Available
Striping-Private Labeling Also Available
Looking for a reliable- Alternative Conduit Source?
We offer plenum innerduct from Premier Conduit who is a manufacturer of plenum, riser and corrugated conduit. We offer superior quality conduit at competitive prices and immediate service. Call us today (866) 650-DATA or see our product sheets. Premier Corrugated Duct- (Outside Plant)
Corrugated Plenum Innderduct Information
Corrugated Plenum Innerduct/Duct - Corrugated Duct Specifications
| SIZE |
Color |
Part Number |
Nominal ID (Inside) |
Nominal OD (Outside) |
Pull Tape |
Reel Size |
Reel Length (Feet) |
| 1 inch |
Orange |
P-100T-1000 |
1.049" |
1.365" |
900 lb |
48-30-24 |
1000 Feet |
| 1 inch |
Orange |
P-100T-1800 |
1.049" |
1.365" |
900 lb |
48-30-24 |
1800 Feet |
| 1 inch |
Orange |
P-100T-2500 |
1.049" |
1.365" |
900 lb |
66-41-24 |
2500 Feet |
| 1 inch |
Orange |
P-100T-5000 |
1.049" |
1.365" |
900 lb |
72-41-24 |
5000 Feet |
| 1 inch |
Orange |
P-100T-6500 |
1.049" |
1.365" |
900 lb |
72-45-24 |
6500 Feet |
| 1 inch |
Orange |
P-100T-8000 |
1.049" |
1.365" |
900 lb |
82-41-24 |
8000 Feet |
| 1 1/4" |
Orange |
P-125T-1000 |
1.250" |
1.550" |
900 lb |
48-30-24 |
1000 Feet |
| 1 1/4" |
Orange |
P-125T-2500 |
1.250" |
1.550" |
900 lb |
66-41-24 |
2500 Feet |
| 1 1/4" |
Orange |
P-125T-4000 |
1.250" |
1.550" |
900 lb |
72-41-24 |
4000 Feet |
| 1 1/4" |
Orange |
P-125T-5000 |
1.250" |
1.550" |
900 lb |
72-41-24 |
5000 Feet |
| 1 1/4" |
Orange |
P-125T-6000 |
1.250" |
1.550" |
900 lb |
82-41-24 |
6000 Feet |
| 1 1/4" |
Orange |
P-125T-6500 |
1.250" |
1.550" |
900 lb |
82-41-24 |
6500 Feet |
Plenum Coil Specifications
| Size |
Color |
Part Number |
Nominal ID |
Nominal OD |
Pull Tape |
Coil Length |
| 1 Inch |
Orange |
P-100T-250 |
1.049" |
1.365" |
900 lb |
250 Feet |
| 1 Inch |
Orange |
P-100T-500 |
1.049" |
1.365" |
900 lb |
500 Feet |
| 1 1/4" |
Orange |
P-125T-250 |
1.250" |
1.550" |
900 lb |
250 Feet |
| 1 1/4" |
Orange |
P-125T-500 |
1.250" |
1.550" |
900 lb |
500 Feet |
Plenum Test Results ETL Listed
| Properties |
Test Method |
Value |
| Smoke Peak Optical |
UL-2024 |
0.02 |
| Smoke Average Optical Density |
UL-2024 |
0.01 |
| Maximum Flame Spread Distance-(Feet) |
UL-2024 |
1.5' |
| Maximum Flame Temperature |
UL-2024 |
554 |
Home
| Cables | Switches
| Contact Us | Our
Team | Locations
|
.jpg)
.jpg)
