Fiber Optic Mode Conditioning Cables- Fiber Mode Conditioning Cables- Mode Conditioning Cables- Mode Conditioning Cable

FIBER OPTIC MODE CONDITIONING CABLE--Ultra high quality mode conditioning patch cables for Gigabit Ethernet applications is required where Gigabit 1000 Base-LX routers and switches are installed into existing multimode cable plants. We offer Mode Conditioning cables in most common varieties and combinations of SC, ST, MT-RJ and LC. Short lead times.

Mode conditioning cables are designed for Gigabit Ethernet multimode applications at 1300nm wavelength; the application standard is IEEE 802.3z. All mode conditioning fiber optic patch cords are made with duplex cable; with a single mode to multimode offset fiber connection part in one of the two legs.

Here is the reason we need to use the mode conditioning patch cord : the Gigabit Ethernet application standard requires the use of fiber optic light to achieve the specified data transmitting rates. Usually people use long wave transceiver modules for Gigabit Ethernet, these modules have to operate both single mode and multi mode fibers. And as we know, multimode fiber manufacturing techniques create index of refraction anomalies along the centerline of the multi mode fiber core. When a highly concentrated single mode fiber optic light is sent into the center of a multimode fiberglass, the modes that propagate through the index of refraction anomalies spread out in time causing modal dispersion, this effect is called differential mode delay. Differential mode delay results in reduced bandwidth over distance. By allowing the single mode laser launch to be offset away from the center of the multi mode fiber the mode conditioning patch cord reduces the effect of such differential mode delay.

Catalyst 5000 Series
Mode-Conditioning Cables

Nortel Series Mode Condtioning Cable (e.g. AA0018036)

From the above descriptions we learn how to use such mode conditioning cables: when we use such mode conditioning fiber optic patch cords, we need to connect the yellow leg which is the color of single mode to connect the transmit side of the equipment (single mode Gigabit transceiver) while we connect the orange leg which is the color of multimode to the receive side. (Multimode Gigabit cable plant)

Call (866) FIBER-21 For Availability

SC- Mode conditioning Patch cords
62.5/125uM

SC-LC Mode Conditioning Cables

MTRJ- MTRJ- Mode Conditioning Cable

American Tele Data stocks thousands of singlemode fiber optic jumpers and singlemode fiber optic assemblies in several types including ST and SC singlemode patch cables along with a complete assortment of fiber optic patch cords including LC singlemode, SC singlemode jumpers, and ST singlemode jumpers and adapters. Our singlemode jumpers, single mode patch cables and single mode assemblies come are available in a variety of sizes. To ensure the products' performance, our manufacturing process utilizes high quality connectors with ceramic ferrules (Or Pbronze-if requested), and OFNR riser or higher graded fiber cables. Our extensive range of fiber cable is available in 900um, 1.6mm and 3mm jacketed fiber wires terminated with state-of-the-art connectors such as ST, SC, FC, MTRJ and LC types to meet your standard or custom configurations. We offer the finest quality fiber optic assemblies from several manufacturers including Emerson, Corning, ADC,Telect and more.

We have instock most on the fiber optic assemblies and fiber optic patch cables listed below. American Tele Data provides the highest level of fiber optic patch cords connectivity for all your fiber interconnect applications.  Manufactured and tested to the tightest specifications, Bour patch cords exceed Telcordia GR-326 requirements.  Our precision zirconia ferrules and environmentally rugged connectors and cable assemblies ensure lasting, repeatable connections.Our fiber optic patch cables are optically tested and visually inspected to ensure that fiber optic return loss, insertion loss, and end-face geometry requirements are satisfied.  Our proprietary fiber optic connector polishing processes and fiber optic cable assembly techniques provide minimal back reflection and ultra low insertion loss.  All American Tele Datasupplier facilities worldwide are ISO 9000 registered.

American Tele Data also carries military grade fiber optic assemblies. These military grade fiber optic assemblies use M28876-27 Connectors offer rugged military and industrial multifiber optical connectors for shipboard, indoor and outdoor requirements. These connectors are designed to perform in a wide range of environmental conditions. Plugs and receptacles have several key options to prevent configuration problems in systems using multiple connectors. The M28876 series products are available with cadmium-plated aluminum and stainless steel. For less critical environments, an aluminum with cadmium plate over electroless nickel may be used. Stainless steel may be an excellent solution for applications where contact with salt spray and other corrosive elements is possible. The M28876 series of connectors uses the M29504/14 & /15 terminals.

American Tele Data Now stocks the newest 10 gigabit fiber opitc cable assemblies, multifiber assemblies,MTP fiber optic assemblies, indoor outdoor fiber optic assemblies, mode conditioning fiber optic assemblies and of course we welcome all custom fiber optic assmblies- info.

Indoor Outdoor Fiber Optic Assemblies-Indoor Outdoor Cables 10 Gigabitabit Fiber Assemblies- 10 Gigabit Cables 10 Gigabitabit Fiber Optic Patch Cords - 10 Gig Patch Cords Mode Conditioning Cable Assemblies - Mode Conditioning Cables MTP Cable Assemblies - MTP Cable Assemblies Multi-Fiber Cable Assemblies - Multi- Fiber Cable Jumpers Fiber Channel Assemblies - Fiber Channel Assemblies Military- Harsh Environment Fiber Optic Assemblies- Military Fiber Optic Assemblies

Pre-Terminated Multi-Fiber Assemblies-Info

MTP Cassettes-Info

For Simplex Fiber Optic Assemblies Click Here

American Tele Data can normally ship all our fiber optic jumpers and fiber optic assmblies below the SAME DAY- provided we get your order before 1pm Pacific Time. We GUARANTEE THE LOWEST PRICES ON ALL OUR FIBER OPTIC PATCH CABLES incuding our singlemode jumpers, multimode jumpers, LC jumpers, ST jumpers, SC jumper, MTRJ jumpers, custom fiber optic assemblies-and fiber optic adapters.

HOW TO EXTEND YOUR ETHERNET SIGNAL MORE THAN 300 FEET USING FIBER OPTIC CABLE

July 1/2006 Due to massive fluctuations in the cost of oil, copper and raw goods- please call first to get latest pricing on all copper cables

Fiber Optic Adapters- We Stock Thousands of Fiber Optic Adapters

Pulling Fiber? Ask About our inexpensive Fiber Optic Pulling Eye Attachment

American Tele Dataalso offer EXTREME DISCOUNTS for all fiber optic assembly orders over 50 pcs. Some discounts for single mode jumpers aand multimode jumpers can befrom 50% to 75% on orders for 50pcs and more.We offer even more discounts for ORDERS OF 100 PCS AND MORE-AT ONE TIME. Call us for additional savings. American Tele Data Tele Data also can provide you with most custom assemblies with 24 hour turnaround. Call us for quantity discount pricing. American Tele Data will meet or beat any written quote from any supplier in the United States! We are American Tele Data Operated!!

CALL (866) 342-3721

Please see our FIBER OPTIC Jumper-Patch Cords Pricing Below All of our fiber optic assemblies below can be shipped the same day- if the order is placed before 1pm Pacific Time. Custom fiber optic cable assemblies take 1-3 days to ship in order to meet specific requirements and specifications.WE WILL MEET OR BEAT ANY US BASED QUOTE ON FIBER OPTIC CABLE ASSEMBLIES WITHOUT SACRIFICING QUALITY!!