AFL-ADC-ICC-3M Fiber Optic Splice Trays

  • Fiber Optic Home Page
  • ICC Fiber Optic Patch Panels
  • ICC Fiber Optic Wall Enclosure
  • ICC Fiber Rack Mount Enclosure
  • ICC Fiber Optic Adapters
  • ICC Fiber Optic Bezels
  • ICC Fiber Splice Trays
  • ICC Fiber Optic Jumpers
  • ICC Fiber Optic Media Outlets
  • Fiber Optic Enclosures
  • Wall Mount Fiber Optic Enclosures
  • Rack Mount Fiber Optic Enclosures
  • Additional Fiber Optic Enclosures
  • FO Network Bays-Main Distribtion Frames
  • Rack Mount Patch Panels
  • Fiber Optic Adapters
  • Fiber Optic Modems
  • Fiber Optic Multiplexers
  • Fiber Optic Multiplexers-2
  • Fiber Optic Media Converters
  • Fiber Optic Extenders
  • Fiber Optic Switches
  • Fiber Optic Transceivers
  • Fiber Optic Cables
  •  
    About Us
    cable, vds,patch

     

    Fiber Optic Splice Trays- ICC Fiber Optic Splice Trays-Splice Trays

    American Tele Data Tele Data carries a complete line of AFL Fiber Optic Splice Trays, ADC fiber optic splice tray, Telect fiber optic splice trays, 3M fiber optic splice trays, Century fiber optic aplice trays and ICC Splice trays for use in 12 fiber optic cable splices, 24 fiber optic cable splices, 48 fiber optic cable splices, 144 to 288 fiber optic splice.

    AFL's series of Fiber Optic Splice Trays offers a unique and flexible splice and storage system. Available in three industry standard config­urations (mechanical, fusion or ribbon) or as a totally universal kit, the AFL Telecommunications Fiber Optic system.

    The 12-position splice tray is used as an accessory for fiber cable management products. The tray expands fiber splice capabilities. It also provides the splicing location for the fiber optic cables. The cables are left in the splice tray.The 12-position splice tray may be purchased empty or supplied with a loaded fiber frame. Splice trays are housed in splice drawers. Each ADC 8-inch (20.32 cm) splice module features eight drawers capable of holding up to two single, non-recessed, 12-position splice trays. This single-height splice tray accommodates a variety of splice chips with a capacity up to 192 splices.Splice Trays provides the most flexible and universal fiber storage system available. More info


    NEW Fiber Optic Splice Trays Part Number ICFOSTFM24Splice Tray

    Provides fiber splice protection for up to 24 fiber cable splices.

    NEW Fiber Optic Splice Trays Part Number ICFOSTFM12 Splice Tray

    Provides fiber splice protection for up to 12 fiber cable splices

     

    SEE BELOW Part Numbers- Call For Pricing

    For A Complete List Of Fiber Assemblies Click For A Complete List of Fiber Assemblies

    Place an Order? Call Now (866) 342-3721

    AFL's series of Fiber Optic Splice Trays offers a unique and flexible splice and storage system. Available in three industry standard config­urations (mechanical, fusion or ribbon) or as a totally universal kit, the AFL Telecommunications Fiber Optic Splice Trays provides the most flexible and universal fiber storage system available.

    LightLink™ 1200 Fiber Optic Splice Tray
    Splice Tray for storage of 12 mechanical splices.

    Features:

    Interchangeable inserts allow for single or mass fusion or mechanical splices
    Pre-molded snaps that securely hold buffer tubes or spiral wrap while splicing
    In-line or butt splice capability
    Pre-formed radiuses maintain bend requirements
    Interlocking base and cover provides tray stability without the use of a bolt
    Extended finger guides easily store and route loose fiber or ribbon

    Includes:
    Molded base
    Clear plastic deep cover
    (1) Mechanical splice holder
    (10) Tie-wraps

     

    LightLink™ 2400 Fiber Optic Splice Tray
    Splice Tray for storage of 24 single fusion sleeves.

    Features:

    Interchangeable inserts allow for single or mass fusion or mechanical splices
    Pre-molded snaps that securely hold buffer tubes or spiral wrap while splicing
    In-line or butt splice capability
    Pre-formed radiuses maintain bend requirements
    Interlocking base and cover provides tray stability without the use of a bolt
    Extended finger guides easily store and route loose fiber or ribbon

    Includes:
    Molded base
    Molded cover
    (1) Single fusion splice holder
    (10) Tie-wraps

    LightLink™ 2425 Fiber Optic Splice Tray
    Splice Tray for use in the LG-50 Sealed Closure. Stores 24 single fusion sleeves.

    Features:

    Interchangeable inserts allow for single or mass fusion or mechanical splices
    Pre-molded snaps that securely hold buffer tubes or spiral wrap while splicing
    In-line or butt splice capability
    Pre-formed radiuses maintain bend requirements
    Interlocking base and cover provides tray stability without the use of a bolt
    Extended finger guides easily store and route loose fiber or ribbon

    Includes:
    Molded base with mount bracket
    (3) 8-position mass fusion splice holders

     

    LightLink™ 2448 Fiber Optic Splice Trays
    Splice Tray for storage of 24 single fusion sleeves or 4 mass fusion sleeves (48 fibers).

    Features:

    Interchangeable inserts allow for single or mass fusion or mechanical splices
    Pre-molded snaps that securely hold buffer tubes or spiral wrap while splicing
    In-line or butt splice capability
    Pre-formed radiuses maintain bend requirements
    Interlocking base and cover provides tray stability without the use of a bolt
    Extended finger guides easily store and route loose fiber or ribbon

    Includes:
    Molded base
    Clear plastic deep cover
    (1) Single fusion splice holder
    (1) 4-position mass fusion holder
    (10) Tie-wraps

    LightLink™ 2450 Fiber Optic Splice Tray
    Splice Tray for use in the LG-100 Sealed Closure. Stores 12 single fusion sleeves.

    Features:

    Interchangeable inserts allow for single or mass fusion or mechanical splices
    Pre-molded snaps that securely hold buffer tubes or spiral wrap while splicing
    In-line or butt splice capability
    Pre-formed radiuses maintain bend requirements
    Interlocking base and cover provides tray stability without the use of a bolt
    Extended finger guides easily store and route loose fiber or ribbon

    Includes:
    Molded base
    Molded cover
    (2) 6-position single fusion splice holders
    (10) Tie-wraps

    LightLink™ 4800 Fiber Optic Splice Tray
    Splice Tray for storage of 4 mass fusion sleeves (48 fibers) plus six single fusion sleeves.

    Features:

    Interchangeable inserts allow for single or mass fusion or mechanical splices
    Pre-molded snaps that securely hold buffer tubes or spiral wrap while splicing
    In-line or butt splice capability
    Pre-formed radiuses maintain bend requirements
    Interlocking base and cover provides tray stability without the use of a bolt
    Extended finger guides easily store and route loose fiber or ribbon

    Includes:
    Molded base
    Molded deep cover
    (1) Mass/single fusion splice holder
    (10) Tie-wraps

    LightLink™ 4848 Fiber Optic Splice Tray
    Splice Tray for storage of 12 mass fusion sleeves (144 fibers).

    Features:

    Interchangeable inserts allow for single or mass fusion or mechanical splices
    Pre-molded snaps that securely hold buffer tubes or spiral wrap while splicing
    In-line or butt splice capability
    Pre-formed radiuses maintain bend requirements
    Interlocking base and cover provides tray stability without the use of a bolt
    Extended finger guides easily store and route loose fiber or ribbon

    Includes:
    Molded base
    Clear plastic deep cover
    (1) 12-position mass fusion holder

    LightLink™ 4850 Fiber Optic Splice Tray
    Splice Tray for use in the LG-100 Sealed Closure. Stores 8 mass fusion sleeves (96 fibers).

    Features:

    Interchangeable inserts allow for single or mass fusion or mechanical splices
    Pre-molded snaps that securely hold buffer tubes or spiral wrap while splicing
    In-line or butt splice capability
    Pre-formed radiuses maintain bend requirements
    Interlocking base and cover provides tray stability without the use of a bolt
    Extended finger guides easily store and route loose fiber or ribbon

    Includes:
    Molded base
    Molded deep cover
    (2) 4-position mass fusion splice holders
    (10) Tie-wraps

    LightLink™ 4896 Fiber Optic Splice Tray
    Splice Tray for storage of 96 single fusion sleeves or up to 24 mass fusion sleeves (288 fibers).

    Features:

    Interchangeable inserts allow for single or mass fusion or mechanical splices
    Pre-molded snaps that securely hold buffer tubes or spiral wrap while splicing
    In-line or butt splice capability
    Pre-formed radiuses maintain bend requirements
    Interlocking base and cover provides tray stability without the use of a bolt
    Extended finger guides easily store and route loose fiber or ribbon

    Includes:
    Molded base
    Clear plastic cover
    (1) 12-position mass fusion holder
    (16) 6-position single splice holders
    (6) 4-position mass fusion holders
    (32) Tie-wraps

    LightLink™ OEE Telescoping Fiber Optic Splice Tray
    OEE telescoping splice tray stores up to 48 single fusion sleeves or 12 mass fusion sleeves (144 fibers).

    Features:

    Interchangeable inserts allow for single or mass fusion or mechanical splices
    Pre-molded snaps that securely hold buffer tubes or spiral wrap while splicing
    In-line or butt splice capability
    Pre-formed radiuses maintain bend requirements
    Interlocking base and cover provides tray stability without the use of a bolt
    Extended finger guides easily store and route loose fiber or ribbon

    Includes:
    Molded base and slide assembly
    Molded deep cover
    (3) 4-position mass fusion splice holders
    (2) 24-position single fusion splice holders

     

    Fiber Optic Splice Trays

    Description
    Century Fiberoptic Splice Trays secure, organize and store spliced fibers. The 7” and 8.75” trays hold up to 12 fusion or mechanically splices fibers, and the 10” tray holds up to 24 fibers. The 5” width or the trays ensures adequate bend radius at all wavelengths. All trays come with cable ties to secure the buffer tubes to the tray.

    Models
    Splice Trays

    • OST-101F
    • OST 101M
    • OST-103F
    • OST-103M
    • OST-102F
    • OST –102M

      Splice Holders
    • C10099
    • C10100
    • C10101

      Features
    • Fusion and Mechanical trays
    • Holders for fusion, mechanical and UltraSplice sleeves
    • Each tray holds 12 or 24 fibers
    • Use in any H+S splice cabinet
    • Available in four sizes
    • Easy access snap cover
    • Anodized aluminum
    • Complete with ties for incoming tubes

     


    NEW Fiber Optic Splice Trays Part Number ICFOSTFM24Splice Tray

    Provides fiber splice protection for up to 24 fiber cable splices.

    NEW Fiber Optic Splice Trays Part Number ICFOSTFM12 Splice Tray

    Provides fiber splice protection for up to 12 fiber cable splices

     

     

    ADC Splice Trays

    ADC Fiber Optic Splice Tray

    The 12-position splice tray is used as an accessory for fiber cable management products. The tray expands fiber splice capabilities. It also provides the splicing location for the fiber optic cables. The cables are left in the splice tray.

    The 12-position splice tray may be purchased empty or supplied with a loaded fiber frame. Splice trays are housed in splice drawers. Each ADC 8-inch (20.32 cm) splice module features eight drawers capable of holding up to two single, non-recessed, 12-position splice trays.

    This single-height splice tray accommodates a variety of splice chips with a capacity up to 192 splices.


    ADC Description and Part Number

    Splice Module Accessory Kit, Braided Sleeves and Labels E-501-L71 Call For Pricing & Availability (866) 342-3721
    FEC Heat Shrink, w/ Splice Chips FEC-INCHS Call For Pricing & Availability (866) 342-3721
    Splice Tray, 12 Position, FibrLok FST-3M Call For Pricing & Availability (866) 342-3721
    Splice Tray, 24 Position, FibrLok

    FST-D-3

     

    Call For Pricing & Availability (866) 342-3721
    Splice Tray, 24 Position, Bare Fusion FST-D-FT Call For Pricing & Availability (866) 342-3721
    Splice Tray, 24 Position, Heat Shrink Fusion FST-D-HS Call For Pricing & Availability (866) 342-3721
    Splice Tray, 24 Position, Mechanical FST-D-MT Call For Pricing & Availability (866) 342-3721
    Splice Tray, 24 Position, Northern Telecom QPAK FST-D-NT Call For Pricing & Availability (866) 342-3721
    24 Position, Universal Raychem Chip FST-D-RCM Call For Pricing & Availability (866) 342-3721
    Splice Tray, 24 Position, Rotary FST-D-RT Call For Pricing & Availability (866) 342-3721
    Splice Tray, 24 Position, Universal Raychem FST-D-URCM Call For Pricing & Availability (866) 342-3721
    Splice Tray, 12 Position, Bare Fusion, 11.75" FST-FT Call For Pricing & Availability (866) 342-3721
    Splice Tray, 12 Position, Heat Shrink Fusion FST-HS Call For Pricing & Availability (866) 342-3721
    Splice Tray, 18 Position, with (3) 6 Position Chips, Heat Shrink Fusion FST-HS-3 Call For Pricing & Availability (866) 342-3721
    Splice Tray, 12 Position, Mechanical (Elastomeric) FST-MT Call For Pricing & Availability (866) 342-3721
    Splice Tray, 12 Position, Northern Telecom QPAK FST-NT Call For Pricing & Availability (866) 342-3721
    Splice Tray, 12 Position, Fiberlign Fusion FST-PLP Call For Pricing & Availability (866) 342-3721
    Splice Tray, 12 Position, Raychem Universal Chip FST-RCM Call For Pricing & Availability (866) 342-3721
    Splice Tray, 12 Position, Rotary FST-RT Call For Pricing & Availability (866) 342-3721

     

     

     

    Home | Cables | Switches | Contact Us | Our Team | Locations