Fiber Optic Transmission

  • IMC Networks Media Converters
  • Low Cost Generic Fiber Optic Media Converters
  • Signamax Fiber Optic Media Converters
  • TC Communications Fiber Optic Media Converters
  • Milan Media Converters
  • Transition Media Converters
  • CWDM
  • WDM's
  • WDM' Products
  • Free Space Optics
  • Fiber Optic Security
  • Fiber Optic Modems
  • Fiber Optic Adapters
  • Fiber Optic Media Converters
  • Fiber Optic Multiplexers
  • Fiber Optic Multiplexers-2
  • Fiber Optic Media Converters
  • Fiber Optic Switches
  • Fiber Optic Telephone Extenders
  • Fiber Optic Transceivers
  • Opterna Media Converters
  • Opterna Desk Top Hubs
  • Opterna Fiber Optic Rate Converters
  • Opterna Fiber Optic Switches
  • Opterna Transceivers
  • Opterna Rack Mount Converters
  • Opterna Work Group Switches
  • Opterna Network Access Units
  • DATACOM PRODUCTS

    About Us
    cable, vdsl, patch

     

    Fiber Optic Media Converters

    Fiber Optic Media Converters- Fiber Optic Transceivers - Fiber Optic Modems - T3/ E3 Fiber Optic Modems- Async/Sync Fiber Optic Modems - Fiber Optic Transceivers - Fiber Optic Multiplexers- Ethernet Media Converters - Telephone Extenders - Fiber Optic Media Converters

    Live Support by Citricle

    American Tele Data carries a complete line of fiber optic media converters from several manufacturers including rack mount media converters, singlemode converters, multimode converters, and the new SFP converters that can deliver singlemode fiber optic signals over 100 km

     

    American Tele Data carries a complete line of fiber optic media converters including standalone media converters, rack mount media converters, ethernet converters, ATM OC3 fiber converters, T1/E1 Fiber Converters, DS3/E3 fiber converters from several manufacturers and have most fiber media converters and fiber mode converters in stock in one of our locations. Fiber Optic Media Converters are devices that simply receive data signals from one media, convert and transmit them to another other media. For example, media converters can convert signals transmitted on a copper cable to signals that run on fiber. Since Media Converters function as physical layer networking devices, they remain completely transparent to other networking devices and any upper-level protocol.Media Converters can function in either half-duplex or full duplex mode. Full duplex Ethernet over UTP runs at 20 or 200Mbps, while half-duplex Ethernet over UTP runs at either 10 or 100 Mbps. Full duplex Ethernet is especially valuable in linking two switches or connecting a switch to a file server. No adjustments are necessary when using either mode. A Media Converter will automatically sense which mode is in operation.

    TC Communications-IMC-Milan-Transition Networks-Signamax-Allied Telesyn

    Signamax provides media conversion solutions that support data, voice, video and image transport over a wide variety of transmission media. These products convert a wide variety of data — from serial RS-232 through Standard, Fast, Gigabit Ethernet and SONET/SDH protocols. Conversions from twisted-pair copper cable, coaxial cable, multimode fiber and singlemode fiber, to other types of cable are all possible with the wide array of solutions from Signamax Connectivity Systems.

    Generic Fiber Optic Media Converters- Save Hundreds of Dollars With Our Quality Media Converters

    • Gigabit Fiber Media Converter- Fiber Optic Media Converters
    • Supports multimode and single mode fiber
    • Plug and play unit ensures easy installation and maximum network uptime
    • Standard compliant with 802.3ab 1000BaseT, 802.3z 1000BaseSX, 1000BaseXL

    American Tele Data Tele Data carries a complete line of fiber optic transmission products including fiber optic modems, fiber optic transceivers, fiber optic media converters, WDM's, T1/E1 fiber optic modems, T3/E3 fiber optic modems, fiber optic rack mount modems, rack mount media converters, and fiber optic multiplexers, from several different manufacturers including TC Communications, Milan, Transition networks, Allied Telesyn, Opterna (Formerly Sun Conversion), CXR, Canoga Perkins, Versitron, TCC, Telco Systems, and others. Media Converters are devices that simply receive data signals from one media, convert and transmit them to another other media. For example, media converters can convert signals transmitted on a copper cable to signals that run on fiber. Since Media Converters function as physical layer networking devices, they remain completely transparent to other networking devices and any upper-level protocol.Media Converters can function in either half-duplex or full duplex mode. Full duplex Ethernet over UTP runs at 20 or 200Mbps, while half-duplex Ethernet over UTP runs at either 10 or 100 Mbps. Full duplex Ethernet is especially valuable in linking two switches or connecting a switch to a file server. No adjustments are necessary when using either mode. A Media Converter will automatically sense which mode is in operation.

    Call (866) 342-3721 Or Click On The Chat Button At The Top Of The Page To Talk To One Of Our Representatives

    Fiber Tutorial Page

    Low Cost Generic Fiber Optic Media Converters Low Cost Fiber Optic Media Converters- 100 Base FX Multi-Mode to Single-Mode Converter, SC Connector (Multi-Mode2Km to Single Mode 20Km) - 10 Slot Rack Chassis With Simplex Power Supply, Designed to Work With 10 of the CXL32, CXL-B3, CXL-G2, CXL-BG, and CXL-C Series Media Converters.- Gigabit Media Converter,Ethernet 1000Mbps (BIDI) Bi-Directional, 20Km, Single Mode, SC Connector (Tx:1310nm and Rx:1550nm Over One Fiber), With Support Web Function, For Use With CXL-1600

    TC Communications-IMC-Milan-Transition Networks-Allied Telesyn-Signamax

    IMC Networks Media Converters- IMC Fiber Optic Media Converters- Network managers worldwide rely on the MediaConverter series when converting twisted pair cabling to fiber optics. The modular MediaConverter series is the most cost-effective, flexible solution for everyday fiber networking in the LAN, campus network, outside plant and MAN applications. Complete Selection Of Fiber Optic Media Converters- Singlemode Fiber Optic Media Converters-Mulitmode Fiber Optic Media Converters- Stand Alone Fiber Optic MEdia Converters- Industrial Fiber Optic Media Converters- Gigabit Fiber Optic Media Converters-T1-E-1 Fiber Optic Media Converters-Copper To Fiber Media Converters

    Signamax Managed Fiber Optic Media converters- Unmanaged Fiber Optic Media Converters -Fiber Optic Media Converters- Signamax Fiber Optic Media Converters- Signamax provides media conversion solutions that support data, voice, video and image transport over a wide variety of transmission media. These products convert a wide variety of data — from serial RS-232 through Standard, Fast, Gigabit Ethernet and SONET/SDH protocols. Conversions from twisted-pair copper cable, coaxial cable, multimode fiber and singlemode fiber, to other types of cable are all possible with the wide array of solutions from Signamax Connectivity Systems. Complete Selection Of Fiber Optic Media Converters- Singlemode Fiber Optic Media Converters-Mulitmode Fiber Optic Media Converters- Stand Alone Fiber Optic Media Converters- Industrial Fiber Optic Media Converters- Gigabit Fiber Optic Media Converters-T1-E-1 Fiber Optic Media Converters-Copper To Fiber Media Converters

    Multimode Fiber Optic Media Converters American Tele Data Part Number Multimode Fiber Optic Media Converter Description Price Each-Please Call For Discounts!  

    Multimode Fiber Optic Media Converter

    ATD102502 Fiber Media Converter

    Multimode Fiber Optic Media Converter-100Base TX to FX RJ45- SC Multimode Media Converter

    $69.88 each

    Multimode Fiber Optic Media Converter

    ATD102503 Fiber Optic Media Converter

    Multimode Fiber Optic Media Converter -10/100 Fiber Media Converter SC/MM 1310nm 2Km

    $ 68.88each
    Multimode Fiber Optic Media Converter ATD102504 Fiber Optic Media Converter

    Multimode Fiber Optic Media Converter-10/100 Fiber Media Converter ST/MM 1310nm 2Km

    $68.88each
    Multimode Fiber Optic Media Converter ATD102505 Fiber Optc Media Converter

    Multimode Fiber Optic Media Converter-10/100 Fiber Media Converter LC/MM 1310nm 2Km

    $82.88each
    Singlemode Fiber Optic Media Converters

    American Tele Data Part Number

    SINGLEMODE Fiber Optic Media Converter Description Price
    Singlemode Fiber Optic Media Converter ATD102506 Fiber Optic Media Converter

    Singlemode Fiber Optic Media Converter-10/100 Fiber Media Converter- SC/SM 1310nm 15Km

    $88.88each
    Singlemode Fiber Optic Media Converter ATD102507 Fiber Optic Media Converter

    Singlemode Fiber Optic Media Converter-10/100 Singlemode Fiber Media Converter SC/SM 1310nm 30Km

    $95.88ea
    Singlemode Fiber Optic Media Converter ATD102508 Fiber Optic Media Converter Singlemode Fiber Optic Media Converter-10/100 Singlemode Fiber Media Converter SC/SM 1310nm 40Km $99.88 ea
    Singlemode Fiber Optic Media Converter ATD102509 Fiber Optic Media Converter

    Singlemode Fiber Optic Media Converter-10/100 Singlemode Media Converter ST/SM 1310nm 15Km

    $ 88.88 ea
    Singlemode Fiber Optic Media Converter ATD102510 Fiber Optic Media Converter

    Singlemode Fiber Optic Media Converter-10/100 Fiber Media Converter ST/SM 1310nm 30Km

    $99.88 ea
    Singlemode Fiber Optic Media Converter ATD102511 Fiber Optic Media Converter

    Singlemode Fiber Optic Media Converter-10/100 Media Converter ST/SM 1310nm 40Km

    $99.88 ea
    Singlemode Fiber Optic Media Converter ATD102512 Fiber Optic Media Converter

    Singlemode Fiber Optic Media Converter-10/100 Fiber Media Converter LC/SM 1310nm 15Km

    $ 109.88 ea
    Singlemode Fiber Optic Media Converter ATD102513 Fiber Optic Media Converter

    Singlemode Fiber Optic Media Converter-10/100 Fiber Media Converter LC/SM 1310nm 30Km

    $ 120.88ea
    Singlemode Fiber Optic Media Converter ATD102514 Fiber Optic Media Converter

    Singlemode Fiber Optic Media Converter-10/100 Singlemode Fiber Media Converter LC/SM 1310nm 40Km

    $ 125.88
    Multimode/Singlemode Fiber Optic Media Converter ATD102514 Fiber Optic Media Converter

    Multimode/ Singlemode Fiber Optic Media Converter-Gigabit Fiber Optic Media Converter- SC-MM/850nm to SC-SM/1310

    $ 248.88ea

    Managed Media Converters Chassis System


    18-Bay Rack Mount Managed Media Converter Chassis System - Fiber Optic Media Converter System
    10/100 To 100FX Managed Converters - 10/100 Managed Fiber Optic Media Converters
    10/100 To 100FX Single Fiber WDM Managed Converters - 10/100 WDM Fiber Optic Media Converters
    100FX Singlemode To Multimode Managed Converters -100 FX Fiber Optic Media Converters
    ATM Singlemode To Multimode Managed Converters - ATM Fiber Optic Media Converters
    1000LX To 1000SX/LX Managed Converters - 1000 LX Fiber Optic Media Converters

    Stand Alone Managed Media Converters

    10/100 To 100FX Managed Stand Alone Converters- 10/100 managed Stand Alone Fiber Optic Media Converters
    10/100 To 100FX Single Fiber WMD Managed Stand Alone Converters - 10/100 FX Fiber Optic Media Converters
    10/100/1000 To 1000SX/LX Managed Media Converters - 10/100/1000 SX/LX Fiber Optic Media Converters

    Unmanaged Media Converters

    10/100 To 100FX Converters With Link Fault Signaling (LFS) - 10/100 FX Fiber Optic Media Converters
    10/100 To 100FX Converters With Link Fault Signaling & USB Port 10/100 Link Fault Fiber Optic Media Converters
    10/100 To 100FX Mini Converters - 10/100 FX Mini Fiber Optic Media Converters
    10/100 To 100FX PCI Based Converters - 10/100 FX PCI Media Converters
    10/100 To 100FX Single Fiber WDM Converters With LFS 10/100FX WDM Media Converters
    10/100 To 100FX PoE Converters - 10/100 FX POE Fiber Optic Media Converters
    10/100/1000 To 1000SX/LX Converters - 10/100/1000 SX/LX Converters
    Gigabit Ethernet Media Converters - Gigabit Ethernet Media Converters
    100BaseTX To 100BaseFX Converters - 100 Base TX FX Fiber Optic Media Converters
    10BaseT To 10BaseFL Converters 10 Base T Fiber Optic Converters
    10BaseT To 10Base2 Converter - 10 Base T 10Base 2 Fiber Optic Converters
    100FX Singlemode To Multimode Converters 100FX Fiber Optic Converters
    ATM Singlemode to Multimode Converters - ATM Fiber Optic Converters
    16-Bay Rack Mount Media Converter Chassis 16 Bay Fiber Optic Media Converters- 16 Bay Rack Mount Fiber Optic Converters
    12-Channel Rack Mount Fiber Optic Media Converters - 12 Channel Rack Mount Fiber Optic Converters

    Industrial DIN-Rail Mount Hardened Media Converters

    10/100 To 100FX DIN-Rail Mount Hardened Converters- 10/100 DIN Rail Fiber Optic Converters
    10/100 To 100FX WDM DIN-Rail Mount Hardened Converters 10/100 WDM Rail Mount Fiber Converters

    TC Communications Fiber Optic Media Converters- TC Fiber Optic Media Converters- Complete Selection Of Telephone Extenders-Fiber Optic Media Converters- Singlemode Fiber Optic Media Converters-Mulitmode Fiber Optic Media Converters- Stand Alone Fiber Optic Media Converters- Industrial Fiber Optic Media Converters- Gigabit Fiber Optic Media Converters-T1-E-1 Fiber Optic Media Converters-Copper To Fiber Media Converters

    Milan Media Converters- Milan Fiber Optic Media Converters- Complete Selection Of Fiber Optic Media Converters- Singlemode Fiber Optic Media Converters-Mulitmode Fiber Optic Media Converters- Stand Alone Fiber Optic MEdia Converters- Industrial Fiber Optic Media Converters- Gigabit Fiber Optic Media Converters-T1-E-1 Fiber Optic Media Converters-Copper To Fiber Media Converters

    Transition Media Converters -Transition Networks Fiber Optic Media Converters-Complete Selection Of Fiber Optic Media Converters- Singlemode Fiber Optic Media Converters-Mulitmode Fiber Optic Media Converters- Stand Alone Fiber Optic Media Converters- Industrial Fiber Optic Media Converters- Gigabit Fiber Optic Media Converters-T1-E-1 Fiber Optic Media Converters-Copper To Fiber Media Converters

    MRV Fiber Optic Media Converters MRV MEDIA CONVERTERS - 10/100Base-TX to 100Base-FX Converters MRV Fiber Optic Media More Fiber Optic Media ConvertersClick

    Basic Media Converters Below

    Type Part Number Description
    Fiber Optic Media Converter

    ATDCXL-32M1-2

    Fiber Optic Media Converter 10/100 Base-TX/FX Bridge Converter 2KM, SC Connector (Multi-Mode)
    Fiber Optic Media Converter

    ATDCXL-32M2-2

    Fiber Optic Media Converter 10/100 Base-TX/FX Bridge Converter 2KM, ST Connector (Multi-Mode)
    Fiber Optic Media Converter

    ATDCXL-32S1-20

    Fiber Optic Media Converter 10/100 Base-TX/FX Bridge Converter 20KM, SC Connector (Single-Mode)

    Fiber Optic Media Converter

    ATDCXL-32S1-40

    Fiber Optic Media Converter 10/100 Base-TX/FX Bridge Converter 40KM, SC Connector (Single-Mode)
    Fiber Optic Media Converter

    ATDCXL-32S1-60

    Fiber Optic Media Converter 10/100 Base-TX/FX Bridge Converter 60KM, SC Connector (Single-Mode)
    Fiber Optic Media Converter

    ATDCXL-32S1-100

    Fiber Optic Media Converter 10/100 Base-TX/FX Bridge Converter 100KM, SC Connector (Single-Mode)
    Fiber Optic Media Converter

    ATDCXL-LFPSC-M2

    Fiber Optic Media Converter 10/100 Base-TX/FX Bridge Converter 2KM, SC Connector, with LFP Function (Multi-Mode)

    Fiber Optic Media Converter

    ATDCXL-B32S1-20

    Fiber Optic Media Converter 10/100 Base-TX/FX Single Fiber (BIDI) Bi-Directional Converter 20Km, SC Connector (Tx:1310nm Rx:1550nm over One Fiber)
    Fiber Optic Media Converter

    ATDCXL-B33S1-20

    Fiber Optic Media Converter 10/100 Base-TX/FX Single Fiber (BIDI) Bi-Directional Converter 20Km, SC Connector (Tx:1550nm Rx:1310nm over One Fiber)
    Fiber Optic Media Converter

    ATDCXL-MTS1121-20

    Fiber Optic Media Converter 100 Base FX Multi-Mode to Single-Mode Converter, SC Connector (Multi-Mode 2Km to Single-Mode 20Km)
    Fiber Optic Media Converter

    ATDCXL-MTS1121-40

    Fiber Optic Media Converter 101 Base FX Multi-Mode to Single-Mode Converter, SC Connector (Multi-Mode 2Km to Single-Mode 40Km)
    Fiber Optic Media Converter

    ATDCXL-MTS1121-60

    Fiber Optic Media Converter 102 Base FX Multi-Mode to Single-Mode Converter, SC Connector (Multi-Mode 2Km to Single-Mode 60Km)
    Fiber Optic Media Converter

    ATDCXL-G2M1-550

    Fiber Optic Media Converter Gigabit Ethernet 1000Mbps Media Converter, 500m, SC Connector (Multi-Mode)
    Fiber Optic Media Converter

    ATDCXL-G2S1-10

    Fiber Optic Media Converter Gigabit Ethernet 1000Mbps Media Converter, 10Km, SC Connector (Single-Mode)
    Fiber Optic Media Converter

    ATDCXL-BG2S1-10

    Fiber Optic Media Converter Gigabit Ethernet 1000Mbps (BIDI) Bi-Directional Media Converter, 10Km, SC Connector (Tx:1310nm and Rx:1550nm Over One Fiber)
    Fiber Optic Media Converter

    ATDCXL-BG3S1-10

    Fiber Optic Media Converter Gigabit Ethernet 1000Mbps (BIDI) Bi-Directional Media Converter, 10Km, SC Connector (Tx:1550nm and Rx:1310nm Over One Fiber)
    Fiber Optic Media Converter

    ATDCXL-BG2S1-20

    Fiber Optic Media Converter Gigabit Ethernet 1000Mbps (BIDI) Bi-Directional Media Converter, 20Km, SC Connector (Tx:1310nm and Rx:1550nm Over One Fiber)
    Fiber Optic Media Converter

    ATDCXL-BG3S1-20

    Fiber Optic Media Converter Gigabit Ethernet 1000Mbps (BIDI) Bi-Directional Media Converter, 20Km SC Connector (Tx:1550nm and Rx:1310nm Over One Fiber)

    More Fiber Optic Converters below

    MRV Communications’ Small Form-Factor Pluggable (SFP) transceivers

    MC102Fx - 10/100Base-TX to 100Base-FX Converters MRV Fiber Optic Media More Fiber Optic Media ConvertersClick The MC102 fiber optic media converter product line encompasses copper-to-fiber and fiber-to-fiber conversion units. On all of these fiber optic media converters, the fiber port(s) allow a choice of multimode or single mode fiber, single fiber operation, different wavelengths and power levels.The MC102F/x products are 10/100BaseTX to 100BaseFX converters, providing external power supply (MC102F/x) and internal power supply (MC102FI/x) options. These converters use switching technology for the media conversion, which provides the necessary packet buffering and error filtering, forwarding packets up to 1522 bytes. The copper port on the fiber optic media converter allows auto-negotiation or can be forced to work at 10Mbps or 100Mbps via a hardware switch.

    Fiber optic Question and Answer:

    What are Media Converters
    Media Converters are devices that simply receive data signals from one media, convert and transmit them to another other media. For example, media converters can convert signals transmitted on a copper cable to signals that run on fiber. Since Media Converters function as physical layer networking devices, they remain completely transparent to other networking devices and any upper-level protocols.

    More about Media Converters
    Since a media converter is a physical layer networking device, it:

    • simply converts data from one medium to another on a bit-by-bit basis
    • doesn't look at addresses or other data
    • doesn't recognize or react to collisions
    Therefore a media converter is different from a bridge, a switch, or a repeater.

    A stand alone media converter is a small device with two media-dependent interfaces and a power supply. It can be installed almost anywhere in a network. The style of connector depends on the selection of media to be converted by the unit. In a Fast Ethernet environment, a 100Base-TX to 100Base-FX Media Converter connects a 100Base-TX twisted-pair device to a 100Base-FX compliant single or multimode fiber port that has a fiber-optic connector. In a Gigabit Ethernet, a Media Converter is commonly deployed to convert multimode to single-mode fiber.

    Media Converters can function in either half-duplex or full duplex mode. Full duplex Ethernet over UTP runs at 20 or 200Mbps, while half-duplex Ethernet over UTP runs at either 10 or 100 Mbps. Full duplex Ethernet is especially valuable in linking two switches or connecting a switch to a file server. No adjustments are necessary when using either mode. A Media Converter will automatically sense which mode is in operation.

    EM316x - Copper to Fiber Media Converters

    Fiber Driver® copper to fiber media converter modules from MRV make it easy to merge legacy copper network elements with new or existing fiber optic infrastructure, allowing LAN communications to be extended to distances of up to 130 km or more. In addition, the Multimode Extender (MX) technology found in select Fiber Driver products breaks the transmission barrier of multimode fiber with link distances of up to 10 km.

    Copper to multimode and copper to single mode solutions are available for Ethernet, Fast Ethernet, Gigabit Ethernet and Copper Gigabit Ethernet, OC-3/STM-1, DS3 and E3. (Additional Ethernet copper to fiber solution are provided by our signal repeater and switch modules.

    EM316x - Multimode to Singlemode Media Converters

    The Fiber Driver® collection of Multimode to Single Mode converters allow network managers to connect between Multimode and Single Mode fiber. Conversion to Single Mode fiber can extend the transmission distance to over 100 km. Protocols covered by this group of modules include SONET OC-3 and Gigabit Ethernet.

    Multimode to Single Fiber Single Mode modules can be found in the group of Single Fiber modules.

    E1/T1 Fiber Modems

    The EM316T1 and the EM316E1 modules of the Fiber Driver® family are designed to extend the distance and transmission reliability of T1 (1.544Mbps) or E1 (2.048Mbps) traffic. These units convert the electrical signals to optical signals and transmit them over distances of up to 10 km on Multimode fiber, or distances of up to 100 km on Singlemode fiber. The EM316T1 and EM316E1 are transparent to the framing format, and support AMI or B8ZS (T1) and HDB3 (E1) line codes, respectively. They include an internal elastic buffer to remove jitter from the transmitted data. Six LED indicators aid in monitoring and trouble-shooting this module. A management agent is incorporated on the module to enable management in conjunction with the Fiber Driver EM316NM management card. As part of the Fiber Driver family, the EM316T1 and EM316E1 modules fit in all Fiber Driver chassis types, support local and remote loopback tests, and can be used to interconnect between any T1 or E1 devices. Among the types of T1/E1 devices that can be connected by these modules are PBXs, multiplexers, video CODECS, routers, network servers, and ATM/frame relay switches. Benefits include extended distances, improved quality of transmission, better security, remote management capability, and high density.


    The MC102FR is a 100BaseFX repeater, targeted for fiber media conversion (MM to SM), and used for infrastructure adaptation. It is also used for long distance communications, via repeater chaining. Since the MC102FR performs 3R (retiming, reshaping, re-amplification) signal regeneration, units may be placed one after another without compromising signal quality.

    The MC102FRC is a 100BaseTX to 100BaseFX repeater, targeted for applications requiring long frames (more than 1522 bytes), such as those used by MPLS encapsulation. The MC102FRC also provides an Automatic Link Integrity (ALI) feature, which automatically shuts down the copper link in case of fiber link failure.

    MC102T Fiber Optic Media Converter protocol transparent media converters provide media adaptation signal regeneration up to 100Km for any protocol. Two types of converters are available, for protocols up to 200Mbps rates (FE, STM1, ESCON, E3, etc.) and up to 1.25Gbps (GE, FC, STM4).

    The MC102G Fiber Optic Media Converter products are 1Gbps signal repeaters for Ethernet or Fiber Channel (1Gbps) applications. The MC102G units provide fiber-to-fiber conversion (MM to SM) for infrastructure adaptation. Additionally, since the MC102G provides 3R signal regeneration, networks built by chaining these units can reach distances longer than 100Km without compromising signal quality.

    MS104 - Unmanaged 4-Port Ethernet Fiber Optic Switches

    The MS104 products are 4-port switches, which are targeted for SOHO, FTTH, and other applications where a few 10/100BaseTX devices need to be concentrated and connected to the network by fiber connections. The family members differ from each other by the type of fiber optic ports connection they accommodate, with a choice of multimode fiber, singlemode fiber, single fiber operation, different wavelengths and power levels as well as different connector types (DSC, SC and MTRJ).

    MS105 - Unmanaged 5-Port Ethernet Fiber Optic Switches

    The MS105 products are 5-port switches, which are targeted for SOHO, FTTH, and other applications where a few 10/100BaseTX devices need to be concentrated and connected to the network by fiber connections. The family members differ from each other by the type of fiber optic ports connection they accommodate, with a choice of multimode fiber, singlemode fiber, single fiber operation, different wavelengths and power levels as well as different connector types (DSC, SC and MTRJ).

    MM04 - 4-Port E1 Fiber Optic Media Multiplexer

    The MM04 product line is a 4 port E1 or T1 multiplexer/demultiplexer that transmits over a fiber optic link. The products are standalone (1U), 19" rack mountable (half-size devices). The optical fiber interface is available in a number of standard fiber connections and has optional redundant optical connections. The chassis is available with universal AC power supply (100-240v) or DC power supply (36-60v) and and in option of redundant power supply.

    MM04 devices support four (4) link interfaces and are available for E1 or T1 configurations with connections for RJ-48 (E1/T1 balanced). In long haul mode the interfaces possess usable receive sensitivity of 0 dB to -43 dB for E1 and 0 dB to -36 dB for T1 which allow the device to operate with 0.63 mm (22AWG) cables at distances up to 2.5 km (E1) and 6000 feet (T1).

    Each E1/T1 port is designed to meet regulatory compliant solutions such as for circuit protection against surges and AC lightning, which is essential for long haul E1/T1 lines

    MM04 - 4-Port T1 Fiber Optic Media Multiplexer

    The MM04 product line is a 4 port E1 or T1 multiplexer/demultiplexer that transmits over a fiber optic link. The products are standalone (1U), 19" rack mountable (half-size devices). The optical fiber interface is available in a number of standard fiber connections and has optional redundant optical connections. The chassis is available with universal AC power supply (100-240v) or DC power supply (36-60v) and and in option of redundant power supply.

    MM04 devices support four (4) link interfaces and are available for E1 or T1 configurations with connections for RJ-48 (E1/T1 balanced). In long haul mode the interfaces possess usable receive sensitivity of 0 dB to -43 dB for E1 and 0 dB to -36 dB for T1 which allow the device to operate with 0.63 mm (22AWG) cables at distances up to 2.5 km (E1) and 6000 feet (T1).

    EM316GMX - Gigabit Multimode Extenders

    The Fiber Driver® Gigabit Multimode Extender applies unique technology that allows the transmission of high-speed signals over Multimode fibers to distances much longer than the standard. This allows the use of high-speed backbone protocols over fiber that was originally used for FDDI.

    Fiber optic cables for FDDI applications were typically laid in 2 km increments, since that was the distance limit for FDDI and Fast Ethernet on Multimode fiber. But with today's new high-speed backbone protocols, Multimode fiber's physical characteristics result in a maximum distance of 550 meters,.

    The Fiber Driver Gigabit Multimode Extender offes a solution that is interoperable with all standard Gigabit Ethernet equipment. It carries Gigabit Ethernet data on existing Multimode fiber (FDDI graded) to distances of up to 2 km guaranteed. Depending on the quality of the fiber, links of up to 6 km are possible.

    Optical Protection Switch-EM316OSSH

    The Fiber Driver® Optical Protection Switch from MRV (model number EM316OSSH) makes creating a redundant optical link easier and more affordable than ever before. Designed to provide full path protection for mission critical networks, the module is capable of automatically switching between a primary and secondary (backup) link in 10 ms or less in the event of a fiber cut or transponder failure.

    As an all optical device performing no optical-electrical-optical (OEO) conversion, the EM316OSSH remains protocol independent and accepts all wavelengths from 1260 nm to 1630 nm, making it suitable for virtually any application, including WDM path protection. The module can provide 1+1 protection in resilient point-to-point or Optical Unidirectional Path Switched Ring (O-UPSR) deployments.

    EM316-xSW - 10/100 Ethernet Switches

    The Fiber Driver® family includes three types of switch modules: three-, four-, and six-port Ethernet/Fast Ethernet switches. Switch modules are used to link between 10Mbps and 100Mbps or Half to Full Duplex mode. Switch modules offer a combination of 10/100Base-TX ports and 100Base-FX ports. They separate between Ethernet collision domains and filter local traffic from propagating to the rest of the network.

    EM316xSF - Single Fiber Media Converters

    The Fiber Driver® family’s Single Fiber modules use unique technologies, which provide the ability to combine transmit (TX) and receive (RX) signals onto a single fiber strand. This effectively doubles the available fiber in a network, and eliminates the need for additional fiber installation. The Fiber Driver Single Fiber modules employs Single wavelength bi-directional technology in order to combine the TX and RX on the single strand.

    EM316SC & PASCLCAS - Splitter/Combiner

    Splitter/Combiner technology provides the ability to propagate two signals, transmit (TX) and receive (RX), over a single fiber strand using the same wavelength. The Fiber Driver® Splitter/Combiner modules, and Splitter/Combiner cables for GBICs and SFPs effectively double the availability of fiber in a network. They are fully passive devices that operate at a specific wavelength, and remain protocol and network transparent.

    A pair of Splitter/Combiners add a power loss of only up to 7 dB for SM fiber and 9 dB for MM fiber. Angled Polished Connectors (APCs) are used at the link connections to eliminate cross-talk.

    EM316E1MUX4 - E1 Fiber Multiplexers

    The Fiber Driver® E1 Fiber Multiplexer from MRV Communications transmits four E1 data channels across a fiber optic trunk in a Point-to-Point (PtP) configuration. Each line interface consists of a HDB3 encoder/decoder, and a receiver with equalizer for reliable data and clock recovery. The device also includes a crystal-less jitter attenuator which, depending on system requirements, can be set in the transmit (TX) or receive (RX) path. Line distances from 0 to 100m are supported. Line protection is designed to meet Telecordia GR-1089 standards. The Fiber Driver E1 Fiber Mux is G.703 interface and G.704 framing compliant.

    EM316T1MUX4 - T1 Fiber Multiplexers

    The Fiber Driver® T1 Fiber Multiplexer from MRV Communications transmits four T1 data channels across a fiber optic trunk in a Point-to-Point (PtP) configuration. Each line interface consists of a B8ZS, or AMI encoder/decoder as applicable, and a receiver with equalizer for reliable data and clock recovery. The device also includes a crystal-less jitter attenuator which, depending on system requirements, can be set in the transmit (TX) or receive (RX) path. Line distances from 0 to 100 m are supported. Line protection is designed to meet Telecordia GR-1089.

    WDM22
    E1 / T1 & Fast/Gigabit Ethernet over a Single Fiber

    Combining Fiber Driver® WDM and Splitter/Combiner technology, the E1 and T1 WDM22 modules combine separate voice and data channels onto a single strand of fiber. The EM316FE1SF and EM316GE1SF models merge E1 (2.048Mbs) and Ethernet (100 Mbps and 1000 Mbps respectively), while the EM316FT1SF and EM316GT1SF combine T1 (1.544Mbs) and Ethernet (100 Mbps or 1000 Mbps). The units effectively quadruple available fiber capacity. What would normally require separate dual-fiber links, one for an E1/T1 connection and one for an Ethernet connection, instead takes only a single strand of fiber.

    E1/T1 Fiber Modems

    The EM316T1 and the EM316E1 modules of the Fiber Driver® family are designed to extend the distance and transmission reliability of T1 (1.544Mbps) or E1 (2.048Mbps) traffic. These units convert the electrical signals to optical signals and transmit them over distances of up to 10 km on Multimode fiber, or distances of up to 100 km on Singlemode fiber. The EM316T1 and EM316E1 are transparent to the framing format, and support AMI or B8ZS (T1) and HDB3 (E1) line codes, respectively

    EM316PAMULC, EM316WP, PAWLCSC - Passive Mux/Demux
    2-, 4- and 8-channel modules, and 2-channel cables

    The Fiber Driver® Passive Mux/Demux module and cables deliver the benefits of a Wave Division Multiplexer in a fully passive solution. With matching units placed at each end of an optical link, 2 or more Full Duplex data channels can be combined and transmitted over a Single Mode fiber trunk.

     

     

    Fiber Optic Test Equpment

    Click On Any Of the Links At Left For More Product Information

    American Tele Data carries a complete line of fiber optic transmission products from several different manufacturers including Allied Telesyn, Opterna (Formerly Sun Conversion), CXR, Canoga Perkins, Versitron, TCC, Telco Systems, and others. Our General products include Fiber Optic Modems & Multiplexers; Fiber Optic Data/Telephone Multiplexers; Fiber Ethernet Switches, Transceivers & Media Converters and Ethernet/Fiber/RS-232 Telephone Extenders. Specialty products include Industrial-Hardened Ethernet and Multi-Drop Fiber Modems & Multiplexers for SCADA, Traffic Control, Security & Process Control applications. Fiber Optic Modems are often used to link various process control systems in manufacturing plants, refineries, etc. It is also used to connect Remote Terminal Units to SCADA hosts or controllers in Utility environments.

    Passive Optical Networks-PONS- Click

    American Tele Data Tele Data is now a partner of MRV Communications- please feel free to visit their site for information while we are building up their product section on our web site
    .

    Fiber Optic Switches-Converters-Fiber Drivers

    MRV Products

    Out-of-Band Console & Power Management
    Pluggables
    Wave Division Multiplexing

    By Product Line
    OptiSwitch
    TereScope

    OptiSwitch Products

    Or Call (866) FIBER-21

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    cisco systems
    Telco Systems
    Anritsu
    Leviton
    telecom supply
     
     
    - 2010 All Rights Reserved -