| MRV Products EM316-Lambda Media Converters, GBIC to GBIC Media Converters, Media Converters-2GBIC - GBIC to GBIC Media Converter  Combining data rate independent connectivity with support for GBIC transceivers, the Fiber DriverT GBIC-to-GBIC Media Module (EM316-2GBIC) from MRV Communications defines a new level of deployment flexibility and inventory management, enabling the implementation of an extremely wide range of optical infrastructure solutions from media conversion and signal boosting to lambda conversion, Wave Division Multiplexing (WDM) and Optical Add/Drop Multiplexing (OADM). The GBIC-to-GBIC Media Module offers plug-n-play ease of installation. Simply place the module into the Fiber Driver chassis, insert the GBIC transceivers required for the protocol and distance of the application, and connect to the network. Because GBIC transceivers are portable they can be easily used again at a different location for a different application, maximizing the investment in equipment and reducing the need for on-hand inventory. MRV Communications provides a complete range of optical and copper plug-in interfaces for the EM316-2GBIC. The GBIC-to-GBIC Media Module is data rate independent and performs 2R - reshape and retransmit - conditioning of the data signal. Any protocol is supported, including Fast and Gigabit Ethernet, FDDI, ESCON, SONET (OC-3, OC-12, OC-48 and above), Fibre Channel (1 Gbps & 2 Gbps), Serial Digital Video Interface (SDI) SMPTPE-269 and SMTPE-292, DVB, HDTV (1.5 Gbps), and many others. With an externally connected Mux/Demux unit such as the 4- or 8-channel Fiber Driver CWDM Passive Mux/Demux (EM316PA4N / EM316PA8N), the GBIC-to-GBIC Media Module can be used as a WDM solution building block configured to the desired protocol/data rate and provided with GBICs of the required wavelengths. Deployed along a WDM trunk at customer service points using MRV Communications' passive OADM technology, the GBIC-to-GBIC Media Module can be used to create a sophisticated Add/Drop topology. The GBIC-to-GBIC Media Module is a hot swappable, two-slot module that can be placed in any powered Fiber Driver chassis. It fully supports the GBIC standard. Through the Fiber Driver Network Management Module, the EM316-2GBIC is SNMP manageable and fully supported through the GUI of MegaVision WebT, MRV Communications' comprehensive Network Management System (NMS). |
 |
MRV Products By Category  Out-of-Band Console & Power Management Pluggables Wave Division Multiplexing By Product Line OptiSwitch TereScope Fiber Driver Products
 Overview
Fiber Driver System
Overview
Chassis & Management
Pluggables Modules
CWDM
Modules
TDM Aggregators
Console Server Modules
Repeaters
Converters
Single Svc Ethernet
DemarcRedundant Links Single Fiber Links
Miniature Ethernet
Switches Fiber Multiplexers
Application Specific
Media X-Connect
& PMC
WDM
Products
WDM Home
Page
Fiber Driver Modular System LD Modular CWDM/DWDM
Overview
LD1600 LD800 LD400 LDP300 LD SFP Transponder LD Supervisory Module LD ESCON Solution LD 2-Port GbE Transp. Fixed-Form CWDM
Fixed-Form Conv./Rptr.
Overview
Fiber Driver-MC
MC102F/x 100Mb
Conv.
MC102FR 100Mb Rptr. MC102FRC 100Mb Rptr. Protocol Trans. Rptr. MC102G Gigabit Rptr. Fiber Driver-MS
Fiber Driver-MM
Fiber Driver-CM
Plug-In Copper/Optics
|