| MRV Products 
 
 
  
 The Fiber DriverT EM316NM Network Management Module allows 
for the monitoring and managing of your fiber optic infrastructure. It polls all 
active Fiber Driver modules and chassis to which it is linked and reports back 
MAC address, module type, and other system information.
 
 The Network 
Management Module enables module loop-back testing, and provides the ability to 
configure parameters such as system IP address. It monitors system activities 
like the loss of signal on ports, temperature out of range, power supply status, 
fan status, and transmit and receive signal detection. It supports an extensive 
array of traps and can provide automatic notification.
 
 The EM316NM module 
provides several ways to manage your Fiber Driver chassis, modules, and fiber 
infrastructure:
 
 1. Out-of-Band management, using a command line interface 
(CLI), via the RS-232 connector on the EM316NM.
 
 2. In-Band management, 
using Telnet (the EM316NM has a 10BaseT Ethernet connector).
 
 3. SNMP 
(In-Band management), via MRV Communications' MegaVision Web or any standard, 
SNMP-enabled Network Management System.
 
 By daisy-chaining two 16-slot 
chassis together, a single EM316NM Network Management Module can manage up to 31 
Fiber Driver Modules.
 |  | MRV Products 
 By Category
  Out-of-Band Console & Power Management
 Pluggables
 Wave Division Multiplexing
 
 By Product Line
  OptiSwitch
 TereScope
 
 
 |