| MRV Products EM2009-EM4 - 4 Port ESCON Multiplexer LambdaDriver Storage Solutions  The EM2009-EM4 ESCON Multiplexer is a module for the Fiber Driver-LD CWDM/DWDM Solution. By multiplexing multiple channels via TDM into DWDM or CWDM the number of ports in a single fiber can be multiplied by a factor of TDM implementation, thus increasing the efficiency of fiber use as well as saving precious physical space. The first TDM product in Lambda Driver series is 4x ESCON multiplexer module. The ultra compact design is ideally suited for ESCON applications, which often require many parallel links. A combination of the 4x ESCON Mux in the LD800/1600 chassis achieves extremely high levels of density - 128 ESCON services can be run over one fiber pair (with 32 wavelengths). The electrically based multiplexing allows for a significant cost reduction and higher fiber utilization when compared to a pure optical multiplexing solution. The ESCON Mux link fiber interface can be 850nm/1310nm or CWDM grid for direct connection to the CWDM Mux. |
 |
MRV Products By Category  Out-of-Band Console & Power Management Pluggables Wave Division Multiplexing By Product Line OptiSwitch TereScope Fiber Driver Products
 Overview
Fiber Driver System
Overview
Chassis & Management
Pluggables Modules
CWDM
Modules
TDM Aggregators
Console Server Modules
Repeaters
Converters
Single Svc Ethernet
DemarcRedundant Links Single Fiber Links
Miniature Ethernet
Switches Fiber Multiplexers
Application Specific
Media X-Connect
& PMC
WDM
Products
WDM Home
Page
Fiber Driver Modular System LD Modular CWDM/DWDM
Overview
LD1600 LD800 LD400 LDP300 LD SFP Transponder LD Supervisory Module LD ESCON Solution LD 2-Port GbE Transp. Fixed-Form CWDM
Fixed-Form Conv./Rptr.
Overview
Fiber Driver-MC
MC102F/x 100Mb
Conv.
MC102FR 100Mb Rptr. MC102FRC 100Mb Rptr. Protocol Trans. Rptr. MC102G Gigabit Rptr. Fiber Driver-MS
Fiber Driver-MM
Fiber Driver-CM
Plug-In Copper/Optics
|