| MRV Products MC102FRC - 100Base-TX to 100Base-FX Repeaters  The MC102 product line encompasses copper-to-fiber and fiber-to-fiber conversion units. On all of these converters, the fiber port(s) allow a choice of multimode or single mode fiber, single fiber operation, different wavelengths and power levels. The MC102FRC is a 100BaseTX to 100BaseFX repeater, targeted for applications requiring long frames (more than 1522 bytes), such as those used by MPLS encapsulation. The MC102FRC also provides an Automatic Link Integrity (ALI) feature, which automatically shuts down the copper link in case of fiber link failure. |
 |
MRV Products By Category  Out-of-Band Console & Power Management Pluggables Wave Division Multiplexing By Product Line OptiSwitch TereScope Fiber Driver Products
 Overview
Fiber Driver System
Overview
Chassis & Management
Pluggables Modules
CWDM
Modules
TDM Aggregators
Console Server Modules
Repeaters
Converters
Single Svc Ethernet
DemarcRedundant Links Single Fiber Links
Miniature Ethernet
Switches Fiber Multiplexers
Application Specific
Media X-Connect
& PMC
WDM
Products
WDM Home
Page
Fiber Driver Modular System LD Modular CWDM/DWDM
Overview
LD1600 LD800 LD400 LDP300 LD SFP Transponder LD Supervisory Module LD ESCON Solution LD 2-Port GbE Transp. Fixed-Form CWDM
Fixed-Form Conv./Rptr.
Overview
Fiber Driver-MC
MC102F/x 100Mb
Conv.
MC102FR 100Mb Rptr. MC102FRC 100Mb Rptr. Protocol Trans. Rptr. MC102G Gigabit Rptr. Fiber Driver-MS
Fiber Driver-MM
Fiber Driver-CM
Plug-In Copper/Optics
|